Ok, So where can I Speed test them!
Discussion
Had 2 new links installed today, to beef up the backbone.
GigabitEthernet0/1 is up, line protocol is up
Hardware is Gigabit Ethernet, address is xxxx.xxxx.xxxx (bia xxxx.xxxx.xxxx)
Description: Gig E
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive not set
Auto-duplex (Full), 1000Mb/s, media type is T
GigabitEthernet0/2 is up, line protocol is up
Hardware is Gigabit Ethernet, address is xxxx.xxxx.xxxx (bia xxxx.xxxx.xxxx)
Description: Fibre
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive not set
Auto-duplex (Full), 1000Mb/s, media type is SX
I want to speed test them, but even mirror is only delivering 30-40mbit..
anyone know of anywhere I can speedtest a few Gigs of Level3's finest?
GigabitEthernet0/1 is up, line protocol is up
Hardware is Gigabit Ethernet, address is xxxx.xxxx.xxxx (bia xxxx.xxxx.xxxx)
Description: Gig E
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive not set
Auto-duplex (Full), 1000Mb/s, media type is T
GigabitEthernet0/2 is up, line protocol is up
Hardware is Gigabit Ethernet, address is xxxx.xxxx.xxxx (bia xxxx.xxxx.xxxx)
Description: Fibre
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive not set
Auto-duplex (Full), 1000Mb/s, media type is SX
I want to speed test them, but even mirror is only delivering 30-40mbit..
anyone know of anywhere I can speedtest a few Gigs of Level3's finest?
Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff