Cooperman, or anyone with Minispares contacts

[Neil8p]

Hi

Searching through some old papers at home I found an old MiniTech News magazine (May 93!) with some 8 port stuff in it. Minispares were developing efi for the 8 port head and I found a couple of pictures of the plenum chamber

www.arden8port.plus.com/Pics/8%20port%20plenum%20Image1.jpg

www.arden8port.plus.com/Pics/8%20port%20plenum%20Image2.jpg

I'm after finding out if anything like this, or the gear to make this still exists.

Cheers

Neil

Edit to add - Peter, maybe you could print out one of the pics and ask Chris S next time you see him? Many thanks

>>> Edited by Neil8p on Thursday 29th April 13:50

[Cooperman]

Neil, phone Simon,Keith Dodd or Keith's son at Mini Spares - 01707 607700.
It should not be too difficult, but I guess the mapping of the ECU would be the critical thing, not the mechanical engineering aspects.
Not too much of a market for this though, so maybe they haven't done it. Much easier with twin 40 DCOE's I should think.

Hope all is well with you,

Peter

[Neil8p]

Thanks for the info. Yes your probably right, I doubt there is much of a market for it. I guess that why the MBE system costs over £4000!

I'd like fuel injection as it will fit under the standard bonnet profile, plus it will help when there's a turbo hanging off the back of the engine