S1/S2 Rotary Switches

[Gerald-TVR]

I am trying to find a replacement rotary switch and would find it very helpful if someone has a spare they can lend me so i can get dimensions etc.

The originals are no longer available so a 'modern' replacement would be very usefull to have.

Please let me know if you can help

Norman

[Bobhon]

Norman

I had a couple of these that I swapped out, as they broke when I removed the dash.
Give me a day or so to find them in my garage and I'll drop them off with you.

Will need your address by pm/e-mail though.

Bob

[Gerald-TVR]

Thanks Bob YHM

[T' Veteran Racer]

Norman
I have been watching these rotary switches on ebay for months, just in case I ever needed to replace any of mine.

I don't know if they are the same/right size, but at £7.50 I was going to risk it, if the need arose. They do give a hole size of 14mm, although I've not had any of my switches out to measure the hole. Did not want to chance disturbing any and breaking one.

Pete

[Gerald-TVR]

Hi Pete

The hole in the dash is 25mm, by big as the switch is installed from the front of the dash. I've looked as some good switches but none that will fit without some alterations. I quite like these with the labels page 59