Rocker cover washer thingy's

[TonupS2]

Recently I got some V6 2.9 rocker thingy's bright zinc plated.




Thanks to Mike AKA phillpot there is a spare set. First person to PM me can have them.

[Stew Mc]

Would show up my rocker covers too much and I would have to get them sorted so nice offer but will leave for someone who likes underbonnet shinny bits more.

[merky300]

Would look very nice on my freshly painted rocker covers if they are still available

Tony

[TonupS2]

Merky 300
YHM

[phillpot]

Get the right mix of straight and curved !

Mike

[TonupS2]

Now theres a thing.
I just counted that big shinney pile. The sets went off to the plater's in their separate bags but came back in one box. I was rushing that day and only checked the total, not what each set of 16 comprised of. The total numbers of each that I now have works out spot on as 6 straight and 10 curved per set. When you look at the rocker covers, the 2 holes at the middle back of each rocker are obviously straight, the others appear like they should all have curved washers (although it seems that one of the front middle holes to each cover is slightly less curved). Anyway the additional 15 I had, have now been plated and are available as spares. I was going to send you 6 straight and 10 curved. But you can have whatever combination you prefer? Maybe 4 and 12?
Merky 300 have a glance at yours and see what you have/would like.

[phillpot]

Don't think its too critical, at the moment I'm just using the largest flat washers that will fit.