Windscreen Washer Jets
Discussion
My car recently failed it's MOT as the screen wash nozzle only had 1 jet working not 2, when I tried to clean the blocked jet out with a pin the end of the pin broke in the jet meaning I needed to change the whole thing. I didn't want to go down the route of having the washer jet on the wiper blade itself so the only thing for it was to change the actual jet 
Now I have read on here before that it is an absolute nightmare of a job, to be fair though it wasn't too bad at all it might even be described as fairly easy, access can be gained by removing the glove box and getting your hand in there, the hardest thing is getting a 12mm spanner on the fixing nut (stubby spanner needed) for removal/refitting. You will need an assistant to hold the new jet in place (£2.49 from Halfords)while you tighten the new fixing nut but that's it, about 2 hours work from start to finish, so if you need to do it don't be put frightened by it just do it, easy really
Cheers.....Tony..
Now I have read on here before that it is an absolute nightmare of a job, to be fair though it wasn't too bad at all it might even be described as fairly easy, access can be gained by removing the glove box and getting your hand in there, the hardest thing is getting a 12mm spanner on the fixing nut (stubby spanner needed) for removal/refitting. You will need an assistant to hold the new jet in place (£2.49 from Halfords)while you tighten the new fixing nut but that's it, about 2 hours work from start to finish, so if you need to do it don't be put frightened by it just do it, easy really
Cheers.....Tony..
Gassing Station | S Series | Top of Page | What's New | My Stuff