3 red lights on xbox 360, has it happened more than once?
Discussion
tim2100 said:
Unlucky Rocky.
Yes it has happened to a few people more than once.
I think that MS charge £95 to repair the machine. So IMO it is worth trying the X-Clamp replacement kit that on ebay for no much. And then when that fails buy a new arcade which are around £100 now.
I haven't seen that before, do you know what it does/how it works? Thanks for the advice! Yes it has happened to a few people more than once.
I think that MS charge £95 to repair the machine. So IMO it is worth trying the X-Clamp replacement kit that on ebay for no much. And then when that fails buy a new arcade which are around £100 now.
y2blade said:
Snoop Bagg said:
Fixed two Xboxs with the X-Clamp repair, it's too easy compared to dealing with MS!
dealing with MS has always been very easy for me. no dramas or fuss please tell me about the X-Clamp repair though because next time mine goes belly-up it will be out of warranty
The X-Clamp repair is pretty simple, it's more a case of whipping the front plate off and the rest of the case seems to be pretty much made with quick release clips. Both the X-Box's I've fixed so far were out of warranty, as it is a free repair if under 3 years.
A kit like this should do, but try and go for the ones with a reasonable thermal paste and nylon washers:
http://cgi.ebay.co.uk/XBOX-360-X-Clamp-Fix-Kit-RRO...
Rather than explain it:
http://www.youtube.com/watch?v=-uMsO0fB6mw&ann...
Basically the repair takes the give out of the board from the X-Clamp and makes the board less likely to flex under heat. Easier to do than it sounds, I used a small and narrow flat headed screwdriver and a couple of torx bits (8 and 10.)
Once you've taken it to bits it's just a case of cleaning the old thermal paste off the processors, something like acetone on one of the cotton ears buds did the trick for me. And then screwing it all back together. It sounds more technical than it is and just don't overtighten the screws due to it being plastic/aluminium!
Snoop Bagg said:
y2blade said:
Snoop Bagg said:
Fixed two Xboxs with the X-Clamp repair, it's too easy compared to dealing with MS!
dealing with MS has always been very easy for me. no dramas or fuss please tell me about the X-Clamp repair though because next time mine goes belly-up it will be out of warranty
The X-Clamp repair is pretty simple, it's more a case of whipping the front plate off and the rest of the case seems to be pretty much made with quick release clips. Both the X-Box's I've fixed so far were out of warranty, as it is a free repair if under 3 years.
A kit like this should do, but try and go for the ones with a reasonable thermal paste and nylon washers:
http://cgi.ebay.co.uk/XBOX-360-X-Clamp-Fix-Kit-RRO...
Rather than explain it:
http://www.youtube.com/watch?v=-uMsO0fB6mw&ann...
Basically the repair takes the give out of the board from the X-Clamp and makes the board less likely to flex under heat. Easier to do than it sounds, I used a small and narrow flat headed screwdriver and a couple of torx bits (8 and 10.)
Once you've taken it to bits it's just a case of cleaning the old thermal paste off the processors, something like acetone on one of the cotton ears buds did the trick for me. And then screwing it all back together. It sounds more technical than it is and just don't overtighten the screws due to it being plastic/aluminium!
Gassing Station | Video Games | Top of Page | What's New | My Stuff



Anyone know how much it will cost to get fixed? Thanks, Rock.
t!!