Picture of Rear Disk Brake chassis bracket..?

[techbotics]

Hello

As I am sure I have mentioned I am upgrading the rear brakes to Cosworth spec on my S3, I understand I need to have a bracked made and mounted to the chassis for the hard line to flexi brake pipe join.

Does anyone have a picture of this so I can see where TVR put it please..? S4 or V8S would be fine.

Many Thanks

Damian S3

[Ragtop]

Hi Damian,

I think you'll find all the photos you need on page two of Chris's epic reference work:

http://www.pistonheads.com/gassing/topic.asp?h=0&a...

Good luck!
Graham

[techbotics]

Wow what an awesome restoration.... Got the pics thanks for the tip..

Cheers

Damian

[TonupS2]

Damian
I had already had the trailing arms repainted so I didn't want to weld, so I bolted a small stainless steel 'L' bracket on. If you bolt a bracket on and the trailing arms are off the car, be sure (unlike me) that you consider the diameter of the drive shaft within the trailing arm as it is very tight in there.
Tony