hood fit anybody done it before

[spatz]

I am about to start fitting the hood and it seems there is not much room for mistakes. Although there is many pics still
I would be happy to hear about the problems that come up before I run in the same traps.

thanks

[Steve_D]

Don't remember any threads on this as I think most bottled out and had the Factory do it.

Have you spoken to the factory? In the past I have asked specific questions and they get the fitter on the phone to tell you the little tips and tricks they use themselves.

Steve

[spatz]

yes that was their suggestion too, that I can call the guy, however I have been looking at the manual and pics and it seems
tricky. So I will take the challenge ! They install these trouser button under the bulkhead. I have no idea how I shall drill these holes now,
engine and all the tanks are in the way.
Probably the easiest thing is to remove the whole bulkead cover again.

Edited by spatz on Monday 12th October 12:42

[andygtt]

I fitted it and it wasnt that hard even though it was the first prod unit and thus all I had was a selection of pictures and a scribbled bit of paper as a manual lol