Swirl pot top hose
Discussion
After replacing the rocker cover gaskets, I noticed that when refitting the alternator belt, it was almost rubbing on the top hose. Now I know they run close, but this had marks on the pipe from the occasional rub. So I decided to slide the pipe back along the joint at the top seeing as it was pushed on all the way, a good 50mm (2" in old money)
Sliding it back a repositioning the jubilee clip showed me why it was on so far, there was a hole in the bloody thing covered and sealed by the clip.
So after doing a search and came up with nothing, I now need to ask for assistance
Where do I get a new pipe from???? Anyone know part numbers etc. Thanks in advance for probably loads of useful replies
Sliding it back a repositioning the jubilee clip showed me why it was on so far, there was a hole in the bloody thing covered and sealed by the clip.
So after doing a search and came up with nothing, I now need to ask for assistance
Where do I get a new pipe from???? Anyone know part numbers etc. Thanks in advance for probably loads of useful replies
Try here --> http://www.actproducts.co.uk/shop/
next day delivery and they understand what you are asking for !! (makes a chnage these days )
Replaced both top and bottom rad hose on my car.
Parts not cheap but should outlast me !!
next day delivery and they understand what you are asking for !! (makes a chnage these days )
Replaced both top and bottom rad hose on my car.
Parts not cheap but should outlast me !!
Gassing Station | S Series | Top of Page | What's New | My Stuff



