tarmac drive bowing - anything that can be done?
Discussion
Had our house for 3 years and the drive was laid before we moved in. I have noticed where we park the 1 car (2 on drive) that the tarmac has started to bow under the front right wheel. We got rid of our old rover 214 shed 4 months ago and replaced it with a heavy saab oil burner cab, this has made the problem worse. Its quite a narrow drive so no option to move cars over
Is there anything that can be done before it gets worse? The tarmac is in good condition and no more than 5 years old
Is there anything that can be done before it gets worse? The tarmac is in good condition and no more than 5 years old
cheeky_chops said:
Had our house for 3 years and the drive was laid before we moved in. I have noticed where we park the 1 car (2 on drive) that the tarmac has started to bow under the front right wheel. We got rid of our old rover 214 shed 4 months ago and replaced it with a heavy saab oil burner cab, this has made the problem worse. Its quite a narrow drive so no option to move cars over
Is there anything that can be done before it gets worse? The tarmac is in good condition and no more than 5 years old
Sounds like either there is insufficient hardcore underneath the tarmac (most likely) or there has been some settlement/sinking/subsidence in the area. Whatever happens, you will need to repair the problem, either by putting patching tarmac in the hole, which will then be obvious as it will be a different colour to the rest of the drive; or by digging up the affected area and possibly re-laying the hardcore to a deeper depth and re-laying the drive.Is there anything that can be done before it gets worse? The tarmac is in good condition and no more than 5 years old
Your choice.
mrmaggit said:
Sounds like either there is insufficient hardcore underneath the tarmac (most likely) or there has been some settlement/sinking/subsidence in the area.
And/or the hardcore was insufficiently well compacted.Whichever way, only proper, long-term solution is gonna be to dig it out and do it again, I'm afraid.

cheeky_chops said:
cheers for the bad news!
I was hoping they could drill some holes and inject some resin or similar to stop/slow it down... Think i will live with it - patch will look crap and certainly not having it all relaid.
I take it it may just stop getting worse?
Eventually (unless you happen to be on the top of an old mineshaft I was hoping they could drill some holes and inject some resin or similar to stop/slow it down... Think i will live with it - patch will look crap and certainly not having it all relaid.
I take it it may just stop getting worse?

As as been said not much you can do, even if you did manage to stop it sinking by injection of something runny that will set you still have a dip. Unless of course you go with a can of expandable foam and some light praying.
You could always spread the load from the Saab by fitting some MUCH wider tires :-)
You could always spread the load from the Saab by fitting some MUCH wider tires :-)
Edited by eddie1980 on Monday 6th July 14:42
Gassing Station | Homes, Gardens and DIY | Top of Page | What's New | My Stuff