22mm anti roll bar mounts - I've lost mine

[magpies]

now that I'm at the point of starting to build up the chassis into a rolling chassis (S1) I now discover I cannot find my anti roll bar mountings - The rubber (poly)part I will try purchase via tvrparts but anyone know where I can get the metal saddles from?

Mick

[TonupS2]

Hi Mick I recently went through the same thing but was lucky and got mine along with the roll bar from Lucy (geralds poor friend). I was going to get it from TVR Car Parts and I think I was told that the metal mounts were also available from them. Its worth a phone call to Neil. If not someone also told me the mounts were from a sierra? not sure though. Good luck

[TonupS2]

Mick Sorry I just went and measured and I actually got the 26mm dia roll bar & brackets from Lucy I have 2 spare 22mm brackets. if you still need them PM me your address and I will send them. They are fine condition but they didn't fit my S3 chassis.

Edited by TonupS2 on Saturday 20th June 16:55

Edited by TonupS2 on Saturday 20th June 16:57

[magpies]

Cheers Tony - don't know how to pm so I've dent an email

[Barkychoc]

Those brackets are actually sierra front anti roll bar brackets - the original rubbers are ford too.

22mm anti roll bar is V8S / S4.

Look up the bushes / roll bar sizes using this --> http://www.superflex.co.uk/results.php?maker=49&am...

Edited by Barkychoc on Saturday 20th June 22:25