hesitation under acceleration
Discussion
Either the TPS (throttle pot) or the multiway connectors linking the various sensors and injectors to the ECU.
Disconnect your TPS and although the ECU will revert to limp home mode if it is the TPS it should run a lot smoother.
See: http://bertram-hill.co.uk/tvrs3.aspx
Disconnect your TPS and although the ECU will revert to limp home mode if it is the TPS it should run a lot smoother.
See: http://bertram-hill.co.uk/tvrs3.aspx
I also had to replace my TPS recently and found that the spare I had been carrying was incorrect (shaft dia too small) and so relied on the NE Communal S Spares team to come up with the goods... Thanks Graham/Tim.
So I started to look for replacements and could see the Ford/Motorcraft number on my failed TPS was 86TF-9B989-AD which cross referenced to Intermotor 19935. Using this link from our useful links wiki I can see that the 19935 is also used on MG's, Rovers and some Freelanders... I bought a Rover TPS for the princely sum of £9.20 and it appears to be the right fit... Time will tell...
http://partfinder.smpeurope.com/?p=154 <-- click on search ...
the old TPS was disected out of interest and I must admit the internals were a lot simpler than I had expected. heres a pic of the bits... (sorry but uncle dave pic upload appears to have changed since I last used it ...)
http://ketvrin.myphotoalbum.com/view_photo.php?set...
I hope that helps someone...
K
ps: only one TPS died in the making of this picture...
So I started to look for replacements and could see the Ford/Motorcraft number on my failed TPS was 86TF-9B989-AD which cross referenced to Intermotor 19935. Using this link from our useful links wiki I can see that the 19935 is also used on MG's, Rovers and some Freelanders... I bought a Rover TPS for the princely sum of £9.20 and it appears to be the right fit... Time will tell...
http://partfinder.smpeurope.com/?p=154 <-- click on search ...
the old TPS was disected out of interest and I must admit the internals were a lot simpler than I had expected. heres a pic of the bits... (sorry but uncle dave pic upload appears to have changed since I last used it ...)

http://ketvrin.myphotoalbum.com/view_photo.php?set...
I hope that helps someone...
K

ps: only one TPS died in the making of this picture...

Edited by ketvrin on Friday 22 May 09:13
Loubaruch said:
Either the TPS (throttle pot) or the multiway connectors linking the various sensors and injectors to the ECU.
Disconnect your TPS and although the ECU will revert to limp home mode if it is the TPS it should run a lot smoother.
See: http://bertram-hill.co.uk/tvrs3.aspx
Agree with the multiway connectors. My car was rough for the first 6 months of ownership until i had these cleaned off.Disconnect your TPS and although the ECU will revert to limp home mode if it is the TPS it should run a lot smoother.
See: http://bertram-hill.co.uk/tvrs3.aspx
Ever since perfect acceleration.
I think for the connectors if you think they are past their best (at the end of the day how long was a sierra / granada engineered to last?!) I'd cut them off and replace them with new weatherproof connectors if it is feasible.
Fit the wires into the new connectors one at a time to avoid screwing it up.
Fit the wires into the new connectors one at a time to avoid screwing it up.
Edited by Barkychoc on Saturday 23 May 10:49
Gassing Station | S Series | Top of Page | What's New | My Stuff


