Fan switch

[ketvrin]

any good to anyone ?

http://cgi.ebay.co.uk/FORD-GRANADA-MK3-2-9-EFi-V6-...

K

[Gerald-TVR]

I thought that the standard switch (at least on s1/2) clamped into the top steel water pipe

[ketvrin]

Gerald-TVR said:

I thought that the standard switch (at least on s1/2) clamped into the top steel water pipe

Mine (S3) and others Ive seen screw into a boss on the steel pipe from the swirl tank to the radiator. Its hard to say if this is the same as mine

K

[Jed-S]

Different connector to mine. The switch in mine is a generic 22mm one (can't remember the temperature) with spade connectors.

[tvrgit]

ketvrin said:

Gerald-TVR said:

I thought that the standard switch (at least on s1/2) clamped into the top steel water pipe

Mine (S3) and others Ive seen screw into a boss on the steel pipe from the swirl tank to the radiator. Its hard to say if this is the same as mine

K

DOn't think it screws in - I think it pushes in and is held with a little plate.

[ketvrin]

tvrgit said:

ketvrin said:

Gerald-TVR said:

I thought that the standard switch (at least on s1/2) clamped into the top steel water pipe

Mine (S3) and others Ive seen screw into a boss on the steel pipe from the swirl tank to the radiator. Its hard to say if this is the same as mine

K

DOn't think it screws in - I think it pushes in and is held with a little plate.

Mine definitely screws in although I have seen plenty with the push in arrangement...

K

just about see it in this pic

http://ketvrin.myphotoalbum.com/view_photo.php?set...

Edited by ketvrin on Friday 15th May 15:56