Front Hub Dust Shields

[Gerald-TVR]

Following a tip from Ken Page I have bought a pait today at the princly sum of £3.33 + vat each, nice and shiny.

Finis code 6142524 CAP - GREASE. I will add to Alt Parts List

Norman

[kenpage]

norman dont fit them until you have painted the castings you would not want to get paint on them, they are well worth the money for a bit of bling

[Gerald-TVR]

Hi Ken

I'm rebushing with polybushes, new bearings and new top and bottom ball joints on the suspension removed from the fire damaged car. Withe the exception of the ball joints all else (not dust caps of course) will be powder coated before assembly and it will all go together (later in the summer I guess) with the AVO's (which have been overhauled as new by AVO), new grooved disks and reconditioned calipers off the other car . I will be have the trailing arms checked by Adrian@ and then the rear will have the same treatment. Should handel well and look good!!

Edited by Gerald-TVR on Thursday 2nd April 19:58

[kenpage]

norman if the sch scenic tour is on the same lines as last year you will need them he he

[Road2Ruin]

Gerald-TVR said:

Following a tip from Ken Page I have bought a pait today at the princly sum of £3.33 + vat each, nice and shiny.

Finis code 6142524 CAP - GREASE. I will add to Alt Parts List

Norman

Not going to fit some spinners then? Or maybe some neon lights underneath....nice.

[Barkychoc]

Norman make sure you loosely assemble it before getting it blasted & coated.
You need to allow a bit extra for the thickness of the powder coating too, so you may find you have to file the hole a bit bigger for the bottom ball joint. I speak from experience.