Found inside door
Discussion
It is the window guide tube thingy and joins onto the tube on the motor.
See here : http://deadpineapple.net/tvr/diary/2008.php - 3rd pi down shows the guide tube removed from the door and is the bit covered in foam. You can see the red bit tube stiking out of the foam and that bit connects to teh silver tune on the motor mechanism.
See here : http://deadpineapple.net/tvr/diary/2008.php - 3rd pi down shows the guide tube removed from the door and is the bit covered in foam. You can see the red bit tube stiking out of the foam and that bit connects to teh silver tune on the motor mechanism.
Edited by Jed-S on Friday 27th March 18:13
Wiz said:
Found where the pipe went and it was a b
d to get back on the end of the electric window motor unit.
Oh yeah - forgot to mention that it was a pig to fit. I ended up putting a slot in the tube for about 1" to allow it to slide onto the motor unit. Then I used a small jubilee style clip to hold it on.
d to get back on the end of the electric window motor unit.J
Gassing Station | S Series | Top of Page | What's New | My Stuff






