Discussion
For anyone interested http://cgi.ebay.co.uk/1988-TVR-S1-BLUE-Spares-or-g...
Hi Guys
I'm the lucky
person that has bought the remains - I've also purchased a bonnet - I will be collecting this weekend and transporting all the way up to smoggy Teesside. I've got a 3.1ltr Essex which needs a check over and I'm also looking at a Granada Cossy V6 24v. Will put a rollcage in and uprate the brakes and suspension - I'll need some advice on whats available on a tight budget
. All in all I'm lokking forward to driving my first TVR.
Magpies
I'm the lucky
person that has bought the remains - I've also purchased a bonnet - I will be collecting this weekend and transporting all the way up to smoggy Teesside. I've got a 3.1ltr Essex which needs a check over and I'm also looking at a Granada Cossy V6 24v. Will put a rollcage in and uprate the brakes and suspension - I'll need some advice on whats available on a tight budget
. All in all I'm lokking forward to driving my first TVR.Magpies
Welcome to the forum 

Good luck with the project and well done for wanting to get the car back on the road
Longers

magpies said:
All in all I'm lokking forward to driving my first TVR.
A good shakedown run for it would be to S Club on 7/6. That should give you plenty of time to get it sorted, there isn't that much work to do is there..... 
Good luck with the project and well done for wanting to get the car back on the road

Longers
Picked her/him/it
up yesterday and 6 wheels in Essex - along with a bonnet and suspension (std) in Chichester and rack in Droitwich then home - total 795 miles in one day - trailer with car and TWO bonnets behind my A4 - had a better look today as I pushed it into my garage, by heck there is some work to do. Just missed out on fleabay for RS discs and calipers but organised BOA Cossy 24v and flywheel/clutch for next weekend.
Need to locate a company to straighten the offside chassis next (Teesside preferably) Who do I purchase a workshop manual from?
up yesterday and 6 wheels in Essex - along with a bonnet and suspension (std) in Chichester and rack in Droitwich then home - total 795 miles in one day - trailer with car and TWO bonnets behind my A4 - had a better look today as I pushed it into my garage, by heck there is some work to do. Just missed out on fleabay for RS discs and calipers but organised BOA Cossy 24v and flywheel/clutch for next weekend. Need to locate a company to straighten the offside chassis next (Teesside preferably) Who do I purchase a workshop manual from?

Gassing Station | S Series | Top of Page | What's New | My Stuff






