Carbon fibre front splitter

[steve1]

Am after a front splitter in C/F, but would like it flat with no lip. have just re-fitted the original one and finding that it hits some of the bumps around my area.

Steve.

[Twerlie]

steve1 said:

Am after a front splitter in C/F, but would like it flat with no lip. have just re-fitted the original one and finding that it hits some of the bumps around my area.

Steve.

http://www.reverie.ltd.uk/shop/products.php?g1=5f8452&g2=aca435

[alex s]

Another option.

http://www.noblemods.co.uk/exterior.html

[steve1]

alex s said:

Another option.

http://www.noblemods.co.uk/exterior.html

I already have those. but prefer the full length version.

Steve.

[steve1]

Twerlie said:

steve1 said:

Am after a front splitter in C/F, but would like it flat with no lip. have just re-fitted the original one and finding that it hits some of the bumps around my area.

Steve.

http://www.reverie.ltd.uk/shop/products.php?g1=5f8452&g2=aca435

That's the style, but a tad expensive once you've added the dreaded and P&P.

Steve.

[alex s]

steve1 said:

alex s said:

Another option.

http://www.noblemods.co.uk/exterior.html

I already have those. but prefer the full length version.

Steve.

I am in the process of getting a price for a splitter in CF like the noblemods(i have them as well) ones, but one piece full length.
Guessing it will be cheaper than the reverie one ( but not wind tunnel tested!) PM me if you want more info.
Cheers
Alex

[andrewr]

All,

I have the pre production 3 piece carbon splitter on my M400 that Bigriff is designing. It is just going back for some mods but looks really good and and is relatively flat.

[alex s]

andrewr said:

All,

I have the pre production 3 piece carbon splitter on my M400 that Bigriff is designing. It is just going back for some mods but looks really good and and is relatively flat.

Pictures, Price?

[Biggriff]

There is one out there in prototype form with Andrewr. It needs one last mod and I think we will be happy with it.

It's a three piece design and is pre-preg full autoclaved carbon.

Price is not yet fixed but I'm hoping will bne less than the Reverie one piece one, with the benefit that when you wang it you can replace the bit that's damaged only.

I will post some pics later.

[Biggriff]

Here you go.

http://i191.photobucket.com/albums/z279/BigGriff20...

http://i191.photobucket.com/albums/z279/BigGriff20...

[Lakelord]

Biggriff said:

Here you go.

http://i191.photobucket.com/albums/z279/BigGriff20...

http://i191.photobucket.com/albums/z279/BigGriff20...

Do you keep your car in your living room Richard?

[Biggriff]

Thats Andrew's!

Mine's tucked up in bed

[noble jez]

if anyone goes ahead with producing something like this count me in. I have the corner splitters from Noble mods but just doesnt look right. I have been looking around for something different so come on guys lets get a group buy uptogether.

[Biggriff]

They will go ahead, we ae just trying to perfect a robust interlocking system and then they will be in production.

[Adrian W]

i´ve got the c/f and foam one from Reverie, not broken yet

[steve1]

I do think the problem gets worse when you start introducing any sort of lip on the splitter, as said previously, mine is fine when the noblemod corner one's are fitted, it only starts to ground out when I fit the original splitter with the lip.
Hence the reason I am after a flat full length version, so maybe if we could get one made up without the lip, you won't need it in three pieces.

Steve.

[Mr Noble]

I have a brand new splitter if anyone wants to come collect it. Offers around the £99 mark should do it

[steve1]

Is it the original one or aftermarket?

Steve.

[andrewr]

Greg,

YHM

[M400UK]

I have 1 original never used front splitter