fast idle on cerb 4.5

[rossmcdee]

hi, i just had a load of work done on my 99 4.5 cerb. some of which included tightening loose throttlebodies and new injector seals. now the car is idling at 1500rpm. other than that the car is driving as normal. any ideas guys?
ps is there an idle adjust screw on the car or is it all electronic?

[GreenStar Racing]

rossmcdee said:

hi, i just had a load of work done on my 99 4.5 cerb. some of which included tightening loose throttlebodies and new injector seals. now the car is idling at 1500rpm. other than that the car is driving as normal. any ideas guys?
ps is there an idle adjust screw on the car or is it all electronic?

8mm screw at each end of the main throttle rod that links the two banks.

[Byker28i]

On the 4.2 it's on the drivers side of the throttle linkage. Allen bolt with a locking nut that needs an 8mm spanner. You have to pull the throttle linkage away from it adjust and check then lock down.

However - when finished check the throttle cable is still on the curved quadrant on the other side of the throttle linkage. It can drop off.