Spark Plug Gap ?
Discussion
I have a S3c V6 which has always suffered from poor low speed running ie hesitancy, I have done all the usual things like cleaned the ISC and fitted a new throttle pot all of which never completely cured the problem so I though I would start with the basics.
After checking the leads, dizzy cap and rotor arm which all were ok I thought I would check the spark plugs,first of all I broke one trying to get it out but lucky the car came with a couple of spare ones (cheers Grant) when I had got them all out they were gapped at 0.6mm! According to the S series web site they should be 1.0mm ? My question is does everybody gap their plugs to 1.0mm ? or not ?
The plugs fitted to the car are nearly new NGK BPR6EF V groove.
I eagerly await your reply oh wise ones.
Cheers......Tony..
After checking the leads, dizzy cap and rotor arm which all were ok I thought I would check the spark plugs,first of all I broke one trying to get it out but lucky the car came with a couple of spare ones (cheers Grant) when I had got them all out they were gapped at 0.6mm! According to the S series web site they should be 1.0mm ? My question is does everybody gap their plugs to 1.0mm ? or not ?
The plugs fitted to the car are nearly new NGK BPR6EF V groove.
I eagerly await your reply oh wise ones.
Cheers......Tony..
Hey Tony, The plugs that are in were straight from Halfords and I didn't gap them, I thought they were 0.9 for some reason. When I got the car the plugs in it did not have the tapered seats so I swapped them staight away-hopefully correctly.
I never noticed any hesitancy but you have had the car longer then I had it now. Personally I have never gapped plugs wrongly or rightly and never had any problems.
I never noticed any hesitancy but you have had the car longer then I had it now. Personally I have never gapped plugs wrongly or rightly and never had any problems.
Take a look at the S3C data sheet on Pies site in the useful links...
http://www.tvrsseries.com/
1 mm looks right
K
(mines an S3 so 0.8 for me...)
http://www.tvrsseries.com/
1 mm looks right
K
(mines an S3 so 0.8 for me...)This morning I refitted the plugs @ 1.0mm gap, also some of the screw on nipples were loose on the tip of the plugs so I rectified that also, to say the car is transformed is an understatement, no more jerking or anything and it pulls that bit stronger, so to celebrate I have just done the Cat and Fiddle Pass between buxton and Macclesfield (twice).
so if anybody has a similar problem it is always worth looking at the basics first.
Cheers........Tony..
so if anybody has a similar problem it is always worth looking at the basics first.
Cheers........Tony..
Gassing Station | S Series | Top of Page | What's New | My Stuff


