electrics nightmare
Discussion
me and the car have had a big falling out
i have been trying to sort the speedo out and got a replacement and fitted it and it still don't work
the car is also running like a dog
i have persevered with the electrics but have come to the conclusion that it is giving me to much grief
can anyone recommend a good auto electrician in the northants area familiar with an S preferably
i have been trying to sort the speedo out and got a replacement and fitted it and it still don't work
the car is also running like a dog
i have persevered with the electrics but have come to the conclusion that it is giving me to much grief
can anyone recommend a good auto electrician in the northants area familiar with an S preferably
Edited by spivvy on Sunday 4th May 12:15
Guiglieli motorsport.
Longers never stops going on about how good they are.....
http://www.guglielmimotorsport.co.uk/
Chris
Longers never stops going on about how good they are.....
http://www.guglielmimotorsport.co.uk/
Chris
Spivvy
I THINK the connector block (red one?) that the speedo plugs into also feeds revs/speed to the ECU. If this connection is poor the speedo won't work and the car will run rough (especially popping on the overrun). Worth a look before you do anything else?
I THINK the connector block (red one?) that the speedo plugs into also feeds revs/speed to the ECU. If this connection is poor the speedo won't work and the car will run rough (especially popping on the overrun). Worth a look before you do anything else?
Edited by mikee boy on Sunday 4th May 20:39
have replaced the speedo sensor had to get a new one and rewire it
which red connector do you mean?
the is a connector near one of the cool vents which seems to be the feed from the gearbox but has 2 extra wires coming off it also
when you check continuity from the gear box sensor pin 1 goes to pin one
pin to goes to pin 2 but pin3 goes to pin one i am not sure if this is correct
which red connector do you mean?
the is a connector near one of the cool vents which seems to be the feed from the gearbox but has 2 extra wires coming off it also
when you check continuity from the gear box sensor pin 1 goes to pin one
pin to goes to pin 2 but pin3 goes to pin one i am not sure if this is correct
When I removed my speedo it was connected into the wiring by a red connector (I seem to remember there being around 6 pins in it?) which sat to the left of the steering column, just behind the removable cover that holds the cigarette lighter. When I follow the wires from the back of the speedo they go to this connector. If you have any more trouble I'll have another look and might be able to get a photo.
Good Luck
Mike
Good Luck
Mike
Gassing Station | S Series | Top of Page | What's New | My Stuff


