Discussion
Here is the list of things done from the US manual.
Service & Inspect at 1000 Miles, Then every 6000-miles / 12 months
Lights
Marker : High Beam : Main Beam (operation & Alignment) : Tail : Brake : Indicators : Hazards
Wipers
Check Wiper Blades & Park Position : Wiper & Washer Operations : Washer Jets & Fluid Level
Bodywork
Panel Fit : Paint Finish : Panel Fasteners : Windows (operation & seals) Lube Front & Rear Panel Hinges
Security
Door Locks (Check operation & lubricate) : Central Locking & Alarm Operation : Emergency Door Release
Engine
Visual Check for Fluid Leaks & Damage : Check Engine Mounts for Wear/Damage : Check Bolts
Coolant
Check Level – top off as necessary – Tighten Hose Clamps
Engine Oil
Drain : Replace Oil Filter : Refill
Spark Plugs
Replace at 6000 miles : Gap at .040
Clutch
Check Hydraulic Fluid Level : Check for Leaks or Damage
Brakes
Check Hydraulic Fluid Level : Check for Leaks or Damage : Check Pad and Disc Wear
Tires
Check condition and Wear : Check Tread Depths (see page 2) : Check for Missing Wheel Weights
Gearbox
Visual Check for Leaks and Damage: Check Fluid Level (top off if necessary) : Check Linkage (adjust as necessary)
Exhaust
Check for Cracks, Leaks or Damage : Check Secure Location
Chassis
Check Chassis and Undercarriage for Damage
Steering
Check for Wear/Damage : Check PAS Fluid (top off if necessary)
Suspension
Check all Components, fittings and bushes for Wear/Damage : Check and Tighten Wheel Nuts, Check
Wheel Bearings
Axel Nuts Check, Tighten to 250 LbFt Use Thread Lock If Found Lose Carry Out Road Test
Service & Inspect Every 12000 Miles / 24 Months
Air Filters
Clean and re-oil
Air Conditioning
Replace Belts
Fuel Filters
Replace
Gearbox
Change Oil
Service & Inspect Every 24000 Miles / 48 Months
Brakes
Change Fluid
Clutch
Change Hydraulic Fluid
Coolant
Drain Coolant, Flush and Replace
At Every Service
Engine
Cold Starting
Interior
Seat Belt/harness operation and adjustment : Steering Column Adjustment : Steering Wheel Centered
Ventilation/AC
Operation of Air-Conditioning at all Speeds : Operation of Heater/Defroster/Vents
Driving
General Handling : Pulling to One Side : Vibrations (wheels/driveshafts) : Wind Noise : Bearing Noise
Brakes
Handbrake Operation : Footbrake Operation – Pulling to One Side, Noisy, Grabbing (F/R?) : Pedal Feel
Clutch/Gears
Clutch Operation (Wear/Pedal/Smell) : Gear Change and Lever Position : Noise
Engine
General Performance, Idling, Acceleration (when cold and when warm) : Hot Starting : Noise
Instruments
Illumination : Function : Accuracy
Trim
Noises : Missing
Service & Inspect at 1000 Miles, Then every 6000-miles / 12 months
Lights
Marker : High Beam : Main Beam (operation & Alignment) : Tail : Brake : Indicators : Hazards
Wipers
Check Wiper Blades & Park Position : Wiper & Washer Operations : Washer Jets & Fluid Level
Bodywork
Panel Fit : Paint Finish : Panel Fasteners : Windows (operation & seals) Lube Front & Rear Panel Hinges
Security
Door Locks (Check operation & lubricate) : Central Locking & Alarm Operation : Emergency Door Release
Engine
Visual Check for Fluid Leaks & Damage : Check Engine Mounts for Wear/Damage : Check Bolts
Coolant
Check Level – top off as necessary – Tighten Hose Clamps
Engine Oil
Drain : Replace Oil Filter : Refill
Spark Plugs
Replace at 6000 miles : Gap at .040
Clutch
Check Hydraulic Fluid Level : Check for Leaks or Damage
Brakes
Check Hydraulic Fluid Level : Check for Leaks or Damage : Check Pad and Disc Wear
Tires
Check condition and Wear : Check Tread Depths (see page 2) : Check for Missing Wheel Weights
Gearbox
Visual Check for Leaks and Damage: Check Fluid Level (top off if necessary) : Check Linkage (adjust as necessary)
Exhaust
Check for Cracks, Leaks or Damage : Check Secure Location
Chassis
Check Chassis and Undercarriage for Damage
Steering
Check for Wear/Damage : Check PAS Fluid (top off if necessary)
Suspension
Check all Components, fittings and bushes for Wear/Damage : Check and Tighten Wheel Nuts, Check
Wheel Bearings
Axel Nuts Check, Tighten to 250 LbFt Use Thread Lock If Found Lose Carry Out Road Test
Service & Inspect Every 12000 Miles / 24 Months
Air Filters
Clean and re-oil
Air Conditioning
Replace Belts
Fuel Filters
Replace
Gearbox
Change Oil
Service & Inspect Every 24000 Miles / 48 Months
Brakes
Change Fluid
Clutch
Change Hydraulic Fluid
Coolant
Drain Coolant, Flush and Replace
At Every Service
Engine
Cold Starting
Interior
Seat Belt/harness operation and adjustment : Steering Column Adjustment : Steering Wheel Centered
Ventilation/AC
Operation of Air-Conditioning at all Speeds : Operation of Heater/Defroster/Vents
Driving
General Handling : Pulling to One Side : Vibrations (wheels/driveshafts) : Wind Noise : Bearing Noise
Brakes
Handbrake Operation : Footbrake Operation – Pulling to One Side, Noisy, Grabbing (F/R?) : Pedal Feel
Clutch/Gears
Clutch Operation (Wear/Pedal/Smell) : Gear Change and Lever Position : Noise
Engine
General Performance, Idling, Acceleration (when cold and when warm) : Hot Starting : Noise
Instruments
Illumination : Function : Accuracy
Trim
Noises : Missing
my car has now completed 28k with full noble history.it has stamps from various noble dealers.another 10k by these so called specialists would have killed it.to@@ers

Gassing Station | Noble | Top of Page | What's New | My Stuff




