Golf MkIV - sidelight issues!
Golf MkIV - sidelight issues!
Author
Discussion

AdrianR

Original Poster:

822 posts

314 months

Monday 21st January 2008
quotequote all
My '02 MkIV Golf is eating sidelights. Have changed the NSR tail light 3 times (now LED to see if that lasts better) in a month, and now the NSF has given up as well.

The rear bulbs seem to silver up inside before they blow. The connectors to, and inside the tail light seem sound so maybe poor connection or earth somewhere else? Suggestions for where to look most welcome.

Thanks,
AdrianR

Silverbullet767

11,330 posts

236 months

Monday 21st January 2008
quotequote all
Do you have the correct fuses in?

Could be drawing too much power, maybe a sign of a faulty alternator? either that or your fitting 6V bulbs hehe

AdrianR

Original Poster:

822 posts

314 months

Tuesday 22nd January 2008
quotequote all
Don't see what difference a fuse would make? Also don't see it as indicative of alternator problems as that would affect all bulbs equally, rather than NSR x3. NSF has only gone once and that's after 5 years/113K miles so could be 'normal' wearout, so I still suspect a problem with a connection to the tail light, but where?

AdrianR

phumy

5,828 posts

267 months

Tuesday 22nd January 2008
quotequote all
I have a MkIV TDi and have the same problems with sidelights, i found that the connection at the bottom of each bulb holder had some kind of poor connection, a quick scratch with a sharp small screwdriver seemed to freshen the connection. No problems now.

Seems to be the metal inside the connection getting almost like a verdigre (sp) growth on it.

raceboy

13,921 posts

310 months

Tuesday 22nd January 2008
quotequote all
Now I may have dreamed it but I think I read on ukmkivs that it's a good idea to change them as a pair, scratchchin

bigburd

2,670 posts

230 months

Friday 25th January 2008
quotequote all
I think you will find it is a widespread issue with the MKIV's I have Xenon's in the R32 but it was eating front sidelight bulbs @ quite an alarming rate. So I changed them for LED bad boys that are a closer colour match to the xenon's and have and had no problems since

http://cgi.ebay.co.uk/XENON-SIDELIGHT-LED-VW-GOLF-...

Edited by bigburd on Friday 25th January 17:35

AdrianR

Original Poster:

822 posts

314 months

Friday 25th January 2008
quotequote all
That was my thinking behind putting LEDs in the rear - if there is an intermittent contact the LED will be much more tolerant of it.

Swapped the front for a standard bulb, will see how it goes.

AdrianR


bigburd

2,670 posts

230 months

Friday 25th January 2008
quotequote all
Sods law - talk about lights and tonight have lost a number plate light, and a tail light. Although today I had a new battery fitted, wonder if this has chucked a few extra volts through the circuit.


JuniorD

9,013 posts

253 months

Tuesday 29th January 2008
quotequote all
Re tail light bulbs - are you using OEM replacement bulbs from VW? Sometimes generic replacement bulbs don't have the little prongs at quite the correct places on the metal part and so they don't fully engage with the connection points in the cluster.

Ranger 6

7,707 posts

279 months

Tuesday 29th January 2008
quotequote all
I found using genuine VW ones extended life dramatically.

bigburd

2,670 posts

230 months

Tuesday 29th January 2008
quotequote all
I was using VAG OEM parts for the front sidelights and the first tail-light failure but have switched to Halfrauds part for the second tail-light. Watch this space

AdrianR

Original Poster:

822 posts

314 months

Thursday 31st January 2008
quotequote all
With the LED bulb in there I can see it is actually flickering while the engine is running which would explain why it eats the ordinary ones. Just that bulb as far as I can see so will have to reinvestigate the holder and wiring.

AdrianR

AdrianR

Original Poster:

822 posts

314 months

Monday 4th February 2008
quotequote all
The LED was flickering as it is now duff so whatever is wrong has zapped that as well.

I put a multimeter on the holder, got 12v with engine off but over 14v with engine running. Same check on fog light gave a max of 13v. So, new theory is that there is too much juice going to this bulb which is causing the burnouts.

But why, and why just that bulb? Anyone know whether the Haynes manual has a decent wiring diagram in it?

AdrianR

bigburd

2,670 posts

230 months

Monday 4th February 2008
quotequote all
Might be worth getting someone to hook your car up to the diags computer, I see you are Bucks/Oxon - give ed @ www.AutoPS.co.uk a shout if you are passing that area.