Discussion
When I was looking for one someone posted a Halfords part number of HB1100B.
(I'm guessing that HB stands for Halfords Belt!)
The last digit refers to the width of the belt - and when I went to Halfords they no longer did any belts in the 'B' width.
I tried an HB1100C which is too wide - it doesn't sit down in the groove - so I took it back for an HB1100A - but they didn't have one so I ended up with an HB1125A which fits - but the alternator is almost at maximum travel so if you can get one an HB1100A would be better.
I couldn't be bothered to go elsewhere - you may be able to get an 1100 long belt in the 'B' width elsewhere, the Halfords 'A' width I'd say is a touch too narrow, it sits very low in the groove.
Chris
(I'm guessing that HB stands for Halfords Belt!)
The last digit refers to the width of the belt - and when I went to Halfords they no longer did any belts in the 'B' width.
I tried an HB1100C which is too wide - it doesn't sit down in the groove - so I took it back for an HB1100A - but they didn't have one so I ended up with an HB1125A which fits - but the alternator is almost at maximum travel so if you can get one an HB1100A would be better.
I couldn't be bothered to go elsewhere - you may be able to get an 1100 long belt in the 'B' width elsewhere, the Halfords 'A' width I'd say is a touch too narrow, it sits very low in the groove.
Chris
Edited by Barkychoc on Sunday 2nd September 20:09
Gassing Station | S Series | Top of Page | What's New | My Stuff