Discussion
Can anyone help.. My 2000 tuscan says "warning efi failure" on the dash.
It all runs well but if i turn right or go round a roundabout it runs on 4/5 cylinders, however if i turn left it goes away and my LCD is back to normal then it comes back on again.. appears i have a loose connection or something.. where should I start to look
Can anyone help me please.
It all runs well but if i turn right or go round a roundabout it runs on 4/5 cylinders, however if i turn left it goes away and my LCD is back to normal then it comes back on again.. appears i have a loose connection or something.. where should I start to look
Can anyone help me please.
T5AMX said:
Can anyone help.. My 2000 tuscan says "warning efi failure" on the dash.
It all runs well but if i turn right or go round a roundabout it runs on 4/5 cylinders, however if i turn left it goes away and my LCD is back to normal then it comes back on again.. appears i have a loose connection or something.. where should I start to look
Can anyone help me please.
Long shot; but try the sensor connector on top of the airbox labelled 'air temp' if not try the wiring connection plugs under the back of the airbox at the bulkhead. (could be the engine mounts gone pressing back on the wiring connections)It all runs well but if i turn right or go round a roundabout it runs on 4/5 cylinders, however if i turn left it goes away and my LCD is back to normal then it comes back on again.. appears i have a loose connection or something.. where should I start to look
Can anyone help me please.
Hope this helps
G
Gassing Station | General TVR Stuff & Gossip | Top of Page | What's New | My Stuff



