clutch problem

[993phill]

just fitted a new master cylinder and bled the system
i can get gears with the car on stands and the back wheels off the ground but put it back down and i cant get any gears ?
any ideas

[rev-erend]

What's the car / engine ?

[993phill]

its a griff 500 taraka engine fitted into a tuscan challenge racer

[rev-erend]

So - it's a std 9.5 inch diaphram clutch.

I'd suggest whipping of the starter motor and take a look at the clutch arm / slave movement..

If it all looks OK - then there is a problem with the clutch itself..

Be it - diaphram seized.., release bearing / mount collapsed.. etc.

With the starter removed you should be albo to feel what the problem is.