Discussion
Hi Guys,
My heater fan is playing up, I've got it out and I need a new fan. Noble will only supply the complete heater box at *cough* £550 plus VAT so after a stripdown found a Smiths sticker with the numbers 1368-820-01 and L/Rover on it. I've tried everywhere to track one down and find out where it comes from.
Any ideas???
Dave
My heater fan is playing up, I've got it out and I need a new fan. Noble will only supply the complete heater box at *cough* £550 plus VAT so after a stripdown found a Smiths sticker with the numbers 1368-820-01 and L/Rover on it. I've tried everywhere to track one down and find out where it comes from.
Any ideas???
Dave
Hi Dave,
presumably it's the electric motor that's playing up. Can you not get it rewound/refurbed? While you've got the heater fan out - can you see the heater matrix and if so, any markings on it? Like you, I'm a bit put off by factory prices and need a new matrix. Haven't been able to determine what car it's from as yet.
Cheers, Bernie
presumably it's the electric motor that's playing up. Can you not get it rewound/refurbed? While you've got the heater fan out - can you see the heater matrix and if so, any markings on it? Like you, I'm a bit put off by factory prices and need a new matrix. Haven't been able to determine what car it's from as yet.
Cheers, Bernie
I'm just having a replacement unit fitted by Gary at crazy horses.
I'm actually a bit hacked off, as I bought a new one from the factory, and it's only managed to last just over 1 1/2 years.
Frankly I'd rather spend the money with Gary, and have something which can be repaired at a fraction of the cost.
Ahhhh, I'll have nice cold air in the cabin for LeMans this time !
--Jools
Hi Terry,
I posted a while ago, trying to get details of the heater matrix. Did you have a new matrix or the heater box in the photos? I know your bill was pretty steep and I've shied away from replacing mine until I can find an alternative source for what I'm sure will turn out to be a pretty standard component if I can only identify it. Don't want to start taking apart until after Le Mans.
Cheers, Bernie
I posted a while ago, trying to get details of the heater matrix. Did you have a new matrix or the heater box in the photos? I know your bill was pretty steep and I've shied away from replacing mine until I can find an alternative source for what I'm sure will turn out to be a pretty standard component if I can only identify it. Don't want to start taking apart until after Le Mans.
Cheers, Bernie
Hello Bernie
I was told that I needed a new heater assembly, so this is what I went for, however I was talking to the factory on Thursday and it would appear that the unit is in two parts and they only replaced the half that was behind the dash although this was still £650.000 + vat plus labour 15 hours at £75.00 per hour + vat.
I was told that I needed a new heater assembly, so this is what I went for, however I was talking to the factory on Thursday and it would appear that the unit is in two parts and they only replaced the half that was behind the dash although this was still £650.000 + vat plus labour 15 hours at £75.00 per hour + vat.
Gassing Station | Noble | Top of Page | What's New | My Stuff




T my blower has packed up too!