Oh oh clutch slipping !
Oh oh clutch slipping !
Author
Discussion

tiggyfudge

Original Poster:

42 posts

267 months

Tuesday 1st May 2007
quotequote all
Just when I thought Trevor and I could catch some early summer rays, the garage servicing him have reported back saying the clutch was slipping badly. The car was laid up last October with no clutch problems apart from a leaking slave cylinder. Having replaced the slave cylinder with a patent part during the winter, I towed the `s` to my local garage. The garage have since bled the clutch slave cylinder with no apparent problems untill todays test drive.

Does a clutch cease due to lack of use over winter ?

The original slave cylinder failed suddenly. Could that effect the clutch itself ?

The new slave cylinder was a pig to fit and seemed to move the clutch arm more. Maybe this is the cause ?

Any ideas ?

Just out ouf interest, how much for a new clutch ? I`ve heared they are expensive ....!!!

Cheers all

foxy600

428 posts

282 months

Wednesday 2nd May 2007
quotequote all
It's not the cost of the clutch, it's the labour. Speak to most garages and they will tell you it is an engine out job and 3 months labour!
I recently had my clutch replaced by Guglielmi's in Daventry. They managed to replace it without taking the engine out, they had to cut the old gearbox mounts off and weld on new ones.
Still quite expensive but nowhere near how much it could have been!

doddze

1,302 posts

268 months

Wednesday 2nd May 2007
quotequote all
I had a new clutch fitted in Jan... by the time i had the slave cylinder replaced and the flywheel machined to fit the clutch plate it was £700...

foxy600

428 posts

282 months

Wednesday 2nd May 2007
quotequote all
Blimey...thought mine was expensive at £500!

doddze

1,302 posts

268 months

Wednesday 2nd May 2007
quotequote all
new slave cylinder was £80... flywheel removed and skimmed up and extra cost for labour..

clarenceboddiger

1,398 posts

244 months

Thursday 3rd May 2007
quotequote all
tiggyfudge said:

The new slave cylinder was a pig to fit and seemed to move the clutch arm more. Maybe this is the cause ?
Any ideas ?
Cheers all

Its not a case of wether it moves it more, its more a case of wether it lets it return to its normal starting position, is the clutch arm moving more ,or is the start position already into its old travel range,if it is it will have a tendency to slip depending on how much.

tiggyfudge

Original Poster:

42 posts

267 months

Thursday 3rd May 2007
quotequote all
Thank god !! Just had word from the garage and the clutch is NOT slipping. It appears that during storage it had seized slightly. Large amounts of WD40 and plenty of clutch pedal pumping seems to have freed it..... Phew. I wasn`t really looking forward to telling the missus about a potential £500 ish for a new clutch !!!

Cheers !

clarenceboddiger

1,398 posts

244 months

Friday 4th May 2007
quotequote all
tiggyfudge said:
Thank god !! Just had word from the garage and the clutch is NOT slipping. It appears that during storage it had seized slightly. Large amounts of WD40 and plenty of clutch pedal pumping seems to have freed it..... Phew. I wasn`t really looking forward to telling the missus about a potential £500 ish for a new clutch !!!

Cheers !

Id be a little bit suspicious of that garage as they seem to have diagnosed 2 opposite problems
1 A slipping clutch
2 a seized clutch
Unmless they were talking about a seized mechanism holding the cluch arm in somehow??