A few bits done
Discussion
I have done a few jobs on the S recently, so thought I'd show a few pics for ref
The Rosejoint for theBonnet Hinge worked OK so did the adjusters, and it was a doddle to line up the bonnet. I think the rosejoints have remove the effects of any misalignment of the hinges and mounting bolts.
The Headlamp Connectors are now fitted and seem quite good quality
And the Indicator lenses are now back together, I ended up sealing the unit with a piece of Acrylic sheet cut to size, this is glued in place all round (ended up using Industrial Evo Stick) this should stop crud getting in. I will still put a bit of silicon on the ends of the lens to stop the getting mucky inside, after all they are fairly exposed.

The Rosejoint for theBonnet Hinge worked OK so did the adjusters, and it was a doddle to line up the bonnet. I think the rosejoints have remove the effects of any misalignment of the hinges and mounting bolts.
The Headlamp Connectors are now fitted and seem quite good quality
And the Indicator lenses are now back together, I ended up sealing the unit with a piece of Acrylic sheet cut to size, this is glued in place all round (ended up using Industrial Evo Stick) this should stop crud getting in. I will still put a bit of silicon on the ends of the lens to stop the getting mucky inside, after all they are fairly exposed.

Gassing Station | S Series | Top of Page | What's New | My Stuff



