rev counter problems
Discussion
one goes to the -v on the coil
one goes to a ignition on fused supply
you will also need a earth.
i assume this is from a std 3 clock dash pack?
if so a later car will have the two wires built into the loom.
one is white/black (coil)
one is green (supply)
cant remember the ends on them, but they are different so the only can go one way
one goes to a ignition on fused supply
you will also need a earth.
i assume this is from a std 3 clock dash pack?
if so a later car will have the two wires built into the loom.
one is white/black (coil)
one is green (supply)
cant remember the ends on them, but they are different so the only can go one way
Gassing Station | Classic Minis | Top of Page | What's New | My Stuff