Sound off this sunday!!!!!!!!!!!!!
Discussion
t17ver said:
Im gona take an interest in this on sunday as im thinking about having something done to mine sometime this year,
What you got done to yours Andy?
What you got done to yours Andy?
Hello Craig
Hows the chim going???
I have the precats removed and straight thru exhaust but keeping the main cat in (which will be comming out soon!!).
I think it wil be a good test.
If we can get a standard chim, ToonTVR's offords exhaust and my straight thru together and do the sound tes and then spend a couple of housr on a rolling road and swap the exhausts between the three cars it could be quite intersting to see which one produces the best BHP increase???
Bit sad i know but we could settle a long standing argument within pistonheads!!!
Andy,
Chim's goin fantastic, its goin in on monday to get some minor paintwork done. but other than that its been awesome.
Sounds like a good idea i wouldn't mind taking mine on a rolling road to see what its pushing out bhp wise either.
You managed to get a unit/lock up sorted yet?
Craig
Chim's goin fantastic, its goin in on monday to get some minor paintwork done. but other than that its been awesome.
Sounds like a good idea i wouldn't mind taking mine on a rolling road to see what its pushing out bhp wise either.
You managed to get a unit/lock up sorted yet?
Craig
Glad the chim is going good...must admit it is one of the best things i have ever owned and i never get bored of driving it...even though i use it every day!!!
i am waiting to go and see a unit at pelaw (cheers stacey-b) so hopefully that will work out...i have got a business loan sorted out so things are looking promising!!!
I have got loads of gear set up to put in the workshop...just a case of getting the final details sorted out!!!
i am waiting to go and see a unit at pelaw (cheers stacey-b) so hopefully that will work out...i have got a business loan sorted out so things are looking promising!!!
I have got loads of gear set up to put in the workshop...just a case of getting the final details sorted out!!!
Well when you get it set up give me a shout if you need a hand, i could do with getting mine up on a ramp and cleaning the chassis and waxoling it, its been done already but i just want piece of mind that ive done it and i know where ive put it.
Did John say he was goin to the meeting this weekend? Im interested to hear the cherry bomb conversion.
I was reading your thread in the chim forum, what you planning to do to you chim?
Did John say he was goin to the meeting this weekend? Im interested to hear the cherry bomb conversion.
I was reading your thread in the chim forum, what you planning to do to you chim?
John is normally there at every meet!!!
I am going to do a complete body off strip down.
My drivers side outrigger has rusted through and need replacing.
The idea is to remob=ve the body, make a jig of the chassis and then i am going to make a stainless steel one...or two or maybe half a dozen!!!
While the body is off i am going to retrim the interior including carpets, seats and dash...and rework a couple of other things...the best one being the active exhaust...nearly got the prototype finished, just a couple of things holding me up but it is very nearly there...i have also got my eye on a chevrolet 5.7 litre V8 which might be going in...not sure yet but we shall see...!
Cheers for the offer of a hand.
To be honest at weekends it is literally going to be run as a club garage rather than a 'pay extortionate amounts of money to have work done on you car' type garage.
During the week i shall be making parts for cars but it will have the added benefit of the spray booth and fabrication shop...hopefully it will be quite good!
I am going to do a complete body off strip down.
My drivers side outrigger has rusted through and need replacing.
The idea is to remob=ve the body, make a jig of the chassis and then i am going to make a stainless steel one...or two or maybe half a dozen!!!
While the body is off i am going to retrim the interior including carpets, seats and dash...and rework a couple of other things...the best one being the active exhaust...nearly got the prototype finished, just a couple of things holding me up but it is very nearly there...i have also got my eye on a chevrolet 5.7 litre V8 which might be going in...not sure yet but we shall see...!
Cheers for the offer of a hand.
To be honest at weekends it is literally going to be run as a club garage rather than a 'pay extortionate amounts of money to have work done on you car' type garage.
During the week i shall be making parts for cars but it will have the added benefit of the spray booth and fabrication shop...hopefully it will be quite good!
tvrbob said:
Is this MSN? 


All the best for the new year and hope you had a good christmas!!!
You know how things go...and i must admit i was down the pub at 5pm and am now getting slightly....erm....dithlecthick through drink and rabbiting on too much so i shall shut up and stop talking!!!!
Gassing Station | North East | Top of Page | What's New | My Stuff