advice on curing letting in water
advice on curing letting in water
Author
Discussion

steve;n;liz

Original Poster:

15 posts

237 months

Sunday 31st December 2006
quotequote all
Hi folks can anyone give me some advice on my S2 letting in water from the front edge of the roof, only had her for a short time and the first down pour we had and my seats was swimming. any help would be appreciated yours steve

pies

13,116 posts

285 months

Sunday 31st December 2006
quotequote all
Leven cover

tvrgit

8,489 posts

281 months

Sunday 31st December 2006
quotequote all
pies said:
Leven cover

Except when it's windy...

steve j

3,223 posts

257 months

Monday 1st January 2007
quotequote all
Aqualung hehe

Tripps

5,814 posts

301 months

Monday 1st January 2007
quotequote all
What state are the seals in? On my old S3 it leaked at the rear edge where the two panels met, but after having the seals replaced it was completely dry.

steve;n;liz

Original Poster:

15 posts

237 months

Monday 1st January 2007
quotequote all
Hi I have checked the state of the seals and found that they could do with replacing, Can anyone tell me who sells them ? or who makes them please.

S2 Giles

2,871 posts

304 months

Monday 1st January 2007
quotequote all
Try WOOLIES - not sure where they are but just do a search for them.

Also try waterproofing the roof with plenty of Fabsil

Roy C

4,213 posts

313 months

Tuesday 2nd January 2007
quotequote all
steve n liz said:
Hi I have checked the state of the seals and found that they could do with replacing, Can anyone tell me who sells them ? or who makes them please.


The rear "targa" seal is Woolies 266 (PVC Snappon with 16mm Sponge Bead):
www.woolies-trim.co.uk/c-37-side-seals.aspx
( first item on page: 266-BLK )

East Kent 135 also fits:
www.classiccar-trim.com/phdi/p1.nsf/supppages/eastkent?opendocument&part=9

I replaced the long seal that goes round the screen top and both doors with East Kent 84 (on same East Kent page as above), as I couldn't find a Woolies seal that fits this use.

I hope this helps.