Alternator not charging
Discussion
Once the engine is running do all the ancillaries work at their full potential e.g. do the head lights work correctly when the engine is running, and it is the battery thats not charging. Could be many things try looking at the battery connections especially the earth, it could also be a very old battery. You need to give us more information if you would like us to fix this over the internet.
Sorry the alternator isn't charging, it's only showing about 11.5v at the back of the alternator on the 2 large gauge wires and nothing on the smaller wire, I think that may be the problem as when I tested a friend’s mini all 3 were showing 14+v.
It's weird as everything started working last night, it was charging etc but now it's stopped again.
It's weird as everything started working last night, it was charging etc but now it's stopped again.
IMHO this suggests a faulty alternator. I would take it back and get them to check it for you. The intermittent nature means there's probably a loose wire inside that is sometimes completing the circuit and sometimes not.
Another thing to check is the engine earth strap is tight. It may be enough for general running but causing problems with the charging circuit (as someone has mentioned before a loose earth on a battery has the same effect). Although seeing as you haven't said its hard to start and the engine seems to run fine it should be okay.
Another thing to check is the engine earth strap is tight. It may be enough for general running but causing problems with the charging circuit (as someone has mentioned before a loose earth on a battery has the same effect). Although seeing as you haven't said its hard to start and the engine seems to run fine it should be okay.
The smaller wire is the sensing wire for the alternator. It detects the voltage at a point remote from the alternator to better allow it to judge the drain present and thus the amount of charge required: this is known as 'battery-sensing'. Older alternator designs sensed the voltage drop internally (known as 'machine-sensing') and were consequently less reliable.
You're obviously measuring the battery voltage at the larger terminals; the lack of anything on the smaller wire may be something as daft as a blown fuse or poorly-plugged connector - depends where they sense the voltage.
The alternator will be expecting to see something coming in to tell it what to do, in effect.
Ian
You're obviously measuring the battery voltage at the larger terminals; the lack of anything on the smaller wire may be something as daft as a blown fuse or poorly-plugged connector - depends where they sense the voltage.
The alternator will be expecting to see something coming in to tell it what to do, in effect.
Ian
Gassing Station | Engines & Drivetrain | Top of Page | What's New | My Stuff