996 oem brake disks mail order?
Discussion
Hi
Just wondering who sells 996 oem brake disks? mail order?
been quoted £1300 for new disks+pads by the OPC greedy t
ts!
Car has only done 18k, the disks are very slightly lipped can they be skimmed?
Car is in dealer for rms under warranty for the next 3 days
thanks
Just wondering who sells 996 oem brake disks? mail order?
been quoted £1300 for new disks+pads by the OPC greedy t
ts! Car has only done 18k, the disks are very slightly lipped can they be skimmed?
Car is in dealer for rms under warranty for the next 3 days
thanks
Edited by chillo on Wednesday 4th October 10:21
Commonly, your disks should last two sets of pads.
Slight lipping is normal and does not mean that you need replacements or skimming.
You really need a micrometer to measure the total disk thickness to decide if they really need replacing or not. Some people will try to persuade you to replace the disks if they appear to be slightly corroded onthe surface through lack of hard use!
Slight lipping is normal and does not mean that you need replacements or skimming.
You really need a micrometer to measure the total disk thickness to decide if they really need replacing or not. Some people will try to persuade you to replace the disks if they appear to be slightly corroded onthe surface through lack of hard use!
there are lots of specialists on the web, design911.com will supply all OEM parts, the cost for all round pads, disks, shims and sensors is around £500 incl VAT
I understand that the job itself is extremely easy to complete.......although I dont think I would have the balls to fiddle with the brakes of a 177 mph car.......
I understand that the job itself is extremely easy to complete.......although I dont think I would have the balls to fiddle with the brakes of a 177 mph car.......
www.eurocarparts.com
Disks are under £100 each for the fronts, less for the rears, pads are around half that an axle.
Fitting is a doddle
www.bombaydigital.com/boxster/projects/brakes/change_pads/
www.bombaydigital.com/boxster/projects/brakes/change_rotors/
Took me on my first attempt 1.5 hours per axle, second attempt 45 minutes.
With no previous experience of anything.
Total cost per axle around £250.
Disks are under £100 each for the fronts, less for the rears, pads are around half that an axle.
Fitting is a doddle
www.bombaydigital.com/boxster/projects/brakes/change_pads/
www.bombaydigital.com/boxster/projects/brakes/change_rotors/
Took me on my first attempt 1.5 hours per axle, second attempt 45 minutes.
With no previous experience of anything.
Total cost per axle around £250.
Also very good www.carnewal.com - Gert is very helpful and the prices are excellent
Gassing Station | Porsche General | Top of Page | What's New | My Stuff


