New Member - 996tt X50
Discussion
Hi Everyone,
I bought a 996tt with X50, aerokit, pccb, pcm2 etc, Lapis with metropole leather, two months ago. Allready had replacement pcm and battery! Tiptronic, as I drive in/around London & M25 a lot. Prefer not to have this ultimately, but felt manual would be just too much for sitting in traffic up to 4 hours, 3 days a week or so..
Loosely considering new wheels and/or exhaust so will look for relevant posts with interest.
Anyway just wanted to say Hi and look forward to participating in the banter !!!
I bought a 996tt with X50, aerokit, pccb, pcm2 etc, Lapis with metropole leather, two months ago. Allready had replacement pcm and battery! Tiptronic, as I drive in/around London & M25 a lot. Prefer not to have this ultimately, but felt manual would be just too much for sitting in traffic up to 4 hours, 3 days a week or so..
Loosely considering new wheels and/or exhaust so will look for relevant posts with interest.
Anyway just wanted to say Hi and look forward to participating in the banter !!!
Oh what car car. It sounds awesome but I can well understand the reason for the "gulp" in your profile when mentioning PCCB's. Current OPC replacement cost is £3400 per corner
Some pics would be fab if you can manage to post.
What type alloys do you have. Are they the standard 18" turbo alloys or the rather more sexier 18" monobloc alloys fitted to the turbo S?
Some pics would be fab if you can manage to post.
What type alloys do you have. Are they the standard 18" turbo alloys or the rather more sexier 18" monobloc alloys fitted to the turbo S?
c2dtg said:
Oh what car car. It sounds awesome but I can well understand the reason for the "gulp" in your profile when mentioning PCCB's. Current OPC replacement cost is £3400 per corner
Some pics would be fab if you can manage to post.
What type alloys do you have. Are they the standard 18" turbo alloys or the rather more sexier 18" monobloc alloys fitted to the turbo S?
Some pics would be fab if you can manage to post.
What type alloys do you have. Are they the standard 18" turbo alloys or the rather more sexier 18" monobloc alloys fitted to the turbo S?
Standard wheels, which were totally 100% unmarked until yesterday afternoon
Worst bit is, I can't blame anyone it was all my own work.
Edited by chillerman on Friday 11th August 14:45
magic torch said:
chillerman said:
Seems a little spooky to get message from someone after reading their postings for the past few months.
.......
.......Who's that?

Your goodself and others, I've read your previous postings with interest for a little while now. It just seems a little odd now I've finally registered to communicate directly rather than simply read everyones' comments/thoughts
chillerman said:
magic torch said:
chillerman said:
Seems a little spooky to get message from someone after reading their postings for the past few months.
.......
.......Who's that?

Your goodself and others, I've read your previous postings with interest for a little while now. It just seems a little odd now I've finally registered to communicate directly rather than simply read everyones' comments/thoughts
I see, was concerned I'd upset someone else...
I stood at the side for a few months before dipping my toes in the water, once you're in it's (mostly) lovely.
Nice car btw.
chillerman said:
c2dtg said:
Oh what car car. It sounds awesome but I can well understand the reason for the "gulp" in your profile when mentioning PCCB's. Current OPC replacement cost is £3400 per corner
Some pics would be fab if you can manage to post.
What type alloys do you have. Are they the standard 18" turbo alloys or the rather more sexier 18" monobloc alloys fitted to the turbo S?
Some pics would be fab if you can manage to post.
What type alloys do you have. Are they the standard 18" turbo alloys or the rather more sexier 18" monobloc alloys fitted to the turbo S?
Standard wheels, which were totally 100% unmarked until yesterday afternoon
Worst bit is, I can't blame anyone it was all my own work.
I know exactly how you feel. I had a VERY CLOSE nearside wheel/kerb interface within approximately 5 minutes of collecting the car from the dealer. Almost wanted to slash my wrists there and then!
Edited by chillerman on Friday 11th August 14:45
X50 and PCCB - assumed it was a TTS as PCCB on a TT is rare.
I am guessing not unless the first owner had good taste to remove the GT silver painted alloys of the TTS and replace with the std alloy. c2dtg - were they lighter monoboc? thought they were just painted!
loevely car - shame about the tip but understand your preference if you sit in traffic all day
I am guessing not unless the first owner had good taste to remove the GT silver painted alloys of the TTS and replace with the std alloy. c2dtg - were they lighter monoboc? thought they were just painted!
loevely car - shame about the tip but understand your preference if you sit in traffic all day
Gassing Station | Porsche General | Top of Page | What's New | My Stuff







