Front number plates

[desmadronic]

Does any one know what number plate holder would fit on the front? I currently have an adhesive one that is not good as it is all wrinkled. Thanks

[viper]

front plate holders originally were off early MR2's I've been told

[viper paul]

Bent 2 pieces of ali for the front of mine, used the original bolt holes underneath for mounting, took hours to work out centering and leveling the plate but the result was no horrid plastic plinth.

[viper]

There are a couple of other options, a small plate holder with suction cups on available from USA, lowering the plate allows the use of the radiator holes again another plate can be fabricrated. Barry has just brought a kit from US Automotive which he reckons works/looks ok. The standard holder (MR2) can also be cut down so its not so ugly

[v1per]

USAUTOMOTIVE do american size uk spec No plates..
The holder came from Bill pemberton at WOODHOUSE DODGE it works on 4 suction cups so no drilling or sticking is needed, It shouldn't come off because the faster you go the stronger it sticks as it is pushed into place..
Will have pics soon