RS Spec' Translation please
RS Spec' Translation please
Author
Discussion

ninesixfourrs

Original Poster:

1,085 posts

248 months

Friday 19th May 2006
quotequote all
Ok you Clever lot hands up who can speak German? Hmmm, Well have a go at translating this in the pic' below I've had a go but could do with a more realistic translation:

Thanks for your efforts

clubsport

7,413 posts

287 months

Friday 19th May 2006
quotequote all
Try babel fish....

http://babelfish.altavista.com


Use the from german to english translator

It's good this internet thing??!!!

scaryx50

78 posts

248 months

Friday 19th May 2006
quotequote all
From my rusty deutsch,

Cup wheels
Sport catalyst
??? strut
???
hotter camshaft
Engine internally sealed???
altered steering
strengthened spring mountings
increased petrol pressure
bigger damper flap??
sintered clutch
K/N airfilter
widened rear track
air cooling via fog light holes
front turbo S brakes
Pagid pads
altered coil?

I think I get a C+

AxelS

173 posts

254 months

Friday 19th May 2006
quotequote all
scaryx50 said:

Cup wheels

Actually it's not wheels but translates word by word into "Cup cross conduit" - that's obviously not the engineering term though.
scaryx50 said:

??? strut
???

The Domstrebe is a rollbar, next one is adjusted compression.
scaryx50 said:

I think I get a C+

Granted.

maximu5

253 posts

254 months

Friday 19th May 2006
quotequote all
Domstrebe = the top of the strut without rubber absorbers (see manthey website for example)
Motorverdichtung angepasst = compression ration adjusted (upwards I take ?)
Grosere Drosselklappe = larger butterfly (?)

AxelS

173 posts

254 months

Friday 19th May 2006
quotequote all
clubsport said:
Try babel fish....

http://babelfish.altavista.com


Use the from german to english translator

It's good this internet thing??!!!


If looking for individual words, also consider http://dict.leo.org - while limited to German and not capable of full sentences it is relatively complete as far as dictionaries go.

maximu5

253 posts

254 months

Friday 19th May 2006
quotequote all
BTW geaendertes Steuergeraet = modified Motronic or ECU (steering doesn't refer to steering wheel but to the steering of the electronics of the engine)

AxelS

173 posts

254 months

Friday 19th May 2006
quotequote all
maximu5 said:
Domstrebe = the top of the strut without rubber absorbers (see manthey website for example)

Isn't that top of the strut just the Dom and the Domstrebe the connecting bar to increase rigidity? (Just like dome...)

maximu5

253 posts

254 months

Friday 19th May 2006
quotequote all
Sorry, AxelS is right, I was confusing Domlager with Domstrebe. It is the bar connecting the 2 top ends of the struts to increase rigidity

ninesixfourrs

Original Poster:

1,085 posts

248 months

Friday 19th May 2006
quotequote all
Domstrebe...I translate as ...Cathedral Prop ?? but on reflection could this mean Strut Brace across top of suspension turrets ? Cup Querrohr...I got as cup traverse pipe (cup Bypass)
does anyone know what interior engine sealing is ??

>> Edited by ninesixfourrs on Friday 19th May 10:08

clubsport

7,413 posts

287 months

Friday 19th May 2006
quotequote all
Literally i would imagine interior engine sealing would relate to re-gasketing to ensure the engine was free from oil leaks etc...

I shall be passing through your part of kent this afternoon, must keep my eyes open for a monkey bum pink NGT

maximu5

253 posts

254 months

Friday 19th May 2006
quotequote all
RMS ?

ninesixfourrs

Original Poster:

1,085 posts

248 months

Friday 19th May 2006
quotequote all
thanks fella's keep em coming

phelix

4,681 posts

278 months

Friday 19th May 2006
quotequote all
Cup exhaust
Sport cat
Strut brace
Motorverdichtubg angepasst translates to gaskets matched to engine, perhaps meaning gaskets have
been trimmed to ensure they don't interfere with air (or oil?) flow.
Hotter cams
Engine's been resealed (ties in with #4 and implies case has been split?)
Modified ECU
Reinforced spring plates
Higher fuel pressure
Large throttle body
Sintered clutch
K&N air filter
Wider rear track
Brake ducts in lieu of front fog lamps
Turbo S front brakes
Pagid pads
Modified heating ducts

ninesixfourrs

Original Poster:

1,085 posts

248 months

Friday 19th May 2006
quotequote all
Well done was just waiting to see who else knew that....(capt. mannering style)

rocket123

29 posts

274 months

Friday 19th May 2006
quotequote all
Motorverdichtung is compression ration so probably means higher compressio ratio
Verstarkte Federteller are stronger valve springs

Rocket

phelix

4,681 posts

278 months

Saturday 20th May 2006
quotequote all
I think you're right on the compression ratio bit but I think Verstarkte Federteller are probably heavy duty strut bearings, perhaps ones without rubber (monoballs). Recommended by dentists everywhere!