What bulb is this?

[bergclimber34]

I ahve this in my hallway, presume it is some kind of eco device, cannot find much about it anywhere.

[Road2Ruin]

Could be a g9 bulb, but thr image is too fuzzy to be sure.

[bergclimber34]

central rectangular port, with 6 pins, 3 either side with a slash across them. image was nicked from reddit sorry

[Belle427]

Looks like a compact fluorescent fitting, can't say I have seen 6 pins like that before though.

[bigandclever]

My google-fu ... I know nothing but might help.

Compact fluorescent bulbs, introduced for 2004 Part L building regs. Most common were 2 and 4 pin but, like yours, some proprietary versions were 6 pin. You might be lucky and find the shroud pops off and it's actually 2 or 4 pin underneath.

Manufacturing of fluorescent bulbs was banned in UK in 2024. So your best bet is going to be replace the whole thing anyway so you can use modern (and more available) bulbs.

[bergclimber34]

Makes sense big, house is a shared ownership built in 04/05 so built with that in mind would be a fitting like that.

Any idea what bulb is needed? Had no luck finding anything.

[Cold]

Is that an insert which unscrews/unclips to reveal a more conventional fitting?

[bergclimber34]

Sadly no, I just tried it, it just removes the shade. AM not really qualified to mess about too much so would like to simple know if a bulb is available,

[bergclimber34]

Better image

[Furbo]

bergclimber34 said:

Better image

I Googled it for you.

[Furbo]

I also do Amazoning

https://www.amazon.co.uk/Compact-Fluorescent-G24q-...

You're welcome.

[bigandclever]

And both of those are 2 and 4 pin. Not 6, which is OP's predicament.

[Cold]

Throw it away and replace with a regular bayonet fitting and use a LED bulb of your choice. It's a government sanctioned landlord special intended to use a low energy lightbulb in communal areas.

The image you've found is also replicated on this thread on the Screwfix site from a few years ago. A 4 pin bulb unit such as G24q-2 would fit - but chuck the whole lot away.
https://community.screwfix.com/threads/can-anyone-...

[bergclimber34]

That is fine if you can do that.

I can not

[Furbo]

bigandclever said:

And both of those are 2 and 4 pin. Not 6, which is OP's predicament.

I am so relieved. AI is not going to take over the world and destroy the human race using killer robots. It will make all the components and get the number of connector pins wrong, rendering them useless.

You can refer to this thread anyone who claims that AI will turn rogue and annihilate humanity. And we have discovered the truth because of bergclimber's landing light.

[Regbuser]

I think you'll find that the 6 pin G24 base will accept both 2 and 4 pin bulbs

[NerveAgent]

Google crabtree 3450/lecfl

Most links do suggest it takes a 4 pin or 2 pin bulb

[bergclimber34]

Just to make sure AI dont go rogue it is the downstairs hall light, not the landing, in case I end up buying something even more obscure, AI only works with the facts you feed it and I am sure landing and hall are easily confused

[Furbo]

bergclimber34 said:

Just to make sure AI dont go rogue it is the downstairs hall light, not the landing, in case I end up buying something even more obscure, AI only works with the facts you feed it and I am sure landing and hall are easily confused

Doh! I was deliberately feeding it wrong information and now you've blown it. When you're vaporised by a robotic death ray you will have no one but yourself to blame.

[netherfield]

Now I've got a couple of G 24 d, for some brick lights down the drive, never had to change one yet in 24 years, not that they get switched on very often, they only have 2 pins, and looks like now there's an LED available.