2016 Zenos E10 R
Discussion
Understand that the services may have been recorded in kms but still don’t understand how the mileage has decreased from the 2024 service to the 2026 service, both presumably in kms if we go off the current mileage on the car. Can you confirm exactly. If not are we saying the mileage is potentially incorrect?
I bought the car in summer 2025 from Total Headturners, they informed me that the clock was in KMs and they could not change it. I can only assume that due to the very small font on the screen they recorded it wrong, sorry I can't shed any more light onto this. I found out how to change it hence we are where we are.
Hello ox
Thanks for the postcode.
Could you help me and respond to my request to view the car today or perhaps tomorrow please? (Sent with the viewing booking form for this auction)
Does the car have an OBD port?
It’s mentioned it’s in storage, have you arranged with the storage company to support you with viewings and permit them, if you can’t be there?
Would you be able to be there and take me out in the car, if I am not permitted to drive it? Or ask the storage company to do so?
Do you have pictures of the clamshell condition/damage before repair please, that you can share?
I am prepared to make a 4.5 hour round trip to view the car and meet you as well, your responses will help me to schedule that, so please do respond.
Thank you.
Thanks for the postcode.
Could you help me and respond to my request to view the car today or perhaps tomorrow please? (Sent with the viewing booking form for this auction)
Does the car have an OBD port?
It’s mentioned it’s in storage, have you arranged with the storage company to support you with viewings and permit them, if you can’t be there?
Would you be able to be there and take me out in the car, if I am not permitted to drive it? Or ask the storage company to do so?
Do you have pictures of the clamshell condition/damage before repair please, that you can share?
I am prepared to make a 4.5 hour round trip to view the car and meet you as well, your responses will help me to schedule that, so please do respond.
Thank you.
Hi
I didn’t see any request but of course you are more than welcome to view.
The car does apparently have an ODB port, as the engine is a ford.
The storage is 24 hour access which I part own as my other business is based there, I can meet you there anytime.
Happy to answer any other questions.
I didn’t see any request but of course you are more than welcome to view.
The car does apparently have an ODB port, as the engine is a ford.
The storage is 24 hour access which I part own as my other business is based there, I can meet you there anytime.
Happy to answer any other questions.
Thanks for the quick response and storage details. Please can you contact Pistonheads for my contact details.. thank you.
I divinely requested a viewing via the Calendar button at the bottom of the listing page!
Look forward to receiving a message by email or sms today, so we can co-ordinate a viewing before the auction ends.
Thanks
I divinely requested a viewing via the Calendar button at the bottom of the listing page!
Look forward to receiving a message by email or sms today, so we can co-ordinate a viewing before the auction ends.
Thanks
Afternoon,
in order to clear up the mileage issue i asked a mechanic to carry out a diagnostic, they could not read the ECU with an Autel as its not a ford item, it was supplied by SCS Delta in Norfolk, speaking with them you need thier software and ODB lead, we were however able to get a reading from a generic ODBII scanner and i have attached a screenshot below, i have contacted the DVLC to see if i can get the MOT's updated. i have also atatched an image of the readout as of today, anyone seinsible can see that its not the easiest to read.
I hope this helps.

in order to clear up the mileage issue i asked a mechanic to carry out a diagnostic, they could not read the ECU with an Autel as its not a ford item, it was supplied by SCS Delta in Norfolk, speaking with them you need thier software and ODB lead, we were however able to get a reading from a generic ODBII scanner and i have attached a screenshot below, i have contacted the DVLC to see if i can get the MOT's updated. i have also atatched an image of the readout as of today, anyone seinsible can see that its not the easiest to read.
I hope this helps.
Gassing Station | PistonHeads Auction Listings | Top of Page | What's New | My Stuff


