I've filled so many holes/petrol tank breather.....

[skyedriver]

Right so everything is sealed against weather, fumes, previous rust etc etc, so where does the breather pipe from the tank go? I presume it vents under the floor.?Better get the old drill out but where?

[Tim-D]

Dim recollection here but I think there should be a nice pierced rubber grommet in the boot floor directly under the tank for the breather pipe to fit through - think you'll need a new pipe though as they tend to get a little stiff & brittle after a few years worth of exposure to fumes - get a new tube match it up with grommet with tank twisted out of the way leave some slack , fasten tank back in then take out the slack from below & snip off to 2 - 3".....

[skyedriver]

Tim-D said:

pierced rubber grommet in the boot floor

Plate, weld, weld, plate, underseal, stuff, hole lost for eternity. Will drill new hole below tank. Yes ex pipe is brittle but WILL go back...