Strange hello but registration plate sizes
Strange hello but registration plate sizes
Author
Discussion

CarbonV12V

Original Poster:

1,173 posts

208 months

Thursday 9th April
quotequote all
Hi - I have just bought a 2023 GTS but it's on private plates and I will be adding my own.

The current front plate is really small (illegal) and I was told a full sized rear does not actually fit without bending.

Therefore my first question is does anyone have any pictures or recommendations for the ideal shapes/sizes of plate - ones that actually fit and look ok but not that small that they would get unwanted attention!


garystoybox

890 posts

142 months

Thursday 9th April
quotequote all
Why not just get something like this?
I had them on my 458, 488’s and 812 and work great. Sure you’ll find a couple of different companies offering this type of solution.

https://www.italiansupercarsolutions.co.uk/shop/Fe...

oharedm

215 posts

294 months

Thursday 9th April
quotequote all
I use the Carbonio mount with a 5 digit private plate. You can trim the full size plate on the right and left border legally but not top and bottom. Get them made to this size and they will have a BS mark. Using a smaller font is actully much more serious (3 points) than displaying no plate (£100). Stick on number plates are also not DLVA approved.

I don't have a front camer is it works for me, I think you are the same.

https://carbonio.com/pages/product-result?rq=mk_fe...yr_2024__md_296pv_coupe-spider

andrew

10,313 posts

217 months

Thursday 9th April
quotequote all
garystoybox said:
Why not just get something like this?
I had them on my 458, 488 s and 812 and work great. Sure you ll find a couple of different companies offering this type of solution.

https://www.italiansupercarsolutions.co.uk/shop/Fe...
£380 for a number plate bracket rofl

CarbonV12V

Original Poster:

1,173 posts

208 months

Thursday 9th April
quotequote all
andrew said:
garystoybox said:
Why not just get something like this?
I had them on my 458, 488 s and 812 and work great. Sure you ll find a couple of different companies offering this type of solution.

https://www.italiansupercarsolutions.co.uk/shop/Fe...
£380 for a number plate bracket rofl
Yes - fortunately there is already one fitted!

RSTurboPaul

12,908 posts

283 months

Thursday 9th April
quotequote all
oharedm said:
I use the Carbonio mount with a 5 digit private plate. You can trim the full size plate on the right and left border legally but not top and bottom. Get them made to this size and they will have a BS mark. Using a smaller font is actully much more serious (3 points) than displaying no plate (£100). Stick on number plates are also not DLVA approved.

I don't have a front camer is it works for me, I think you are the same.

https://carbonio.com/pages/product-result?rq=mk_fe...yr_2024__md_296pv_coupe-spider
I'm not sure this is correct.

The guidance specifies 'the margins at the top, bottom and side of the plate must be 11mm', so it would be perfectly legal to cut down top and bottom to that minimum margin.

Page 9: https://assets.publishing.service.gov.uk/media/669...

CarbonV12V

Original Poster:

1,173 posts

208 months

Thursday 9th April
quotequote all
I agree the plate size can be changed. I measured my existing plates which are part of the same format and also have a border.

If the plates were trimmer at the top and bottom border and the same distance at the sides then they would be approx 420mm wide and 100mm deep.

They can be made with the standard UK legal letters and spacing and just a smaller back plate. Obviously no badge etc.

Hopefully they will fit on the rear and look ok but will share photos once fitted.

RSTurboPaul

12,908 posts

283 months

Friday 10th April
quotequote all
oharedm said:
I use the Carbonio mount with a 5 digit private plate. You can trim the full size plate on the right and left border legally but not top and bottom. Get them made to this size and they will have a BS mark. Using a smaller font is actully much more serious (3 points) than displaying no plate (£100). Stick on number plates are also not DLVA approved.

I don't have a front camer is it works for me, I think you are the same.

https://carbonio.com/pages/product-result?rq=mk_fe...yr_2024__md_296pv_coupe-spider
Apologies for coming back to this post.

I think this part is incorrect also - I don't believe any number plate offences are endorsable.

oharedm

215 posts

294 months

Friday 10th April
quotequote all
Yes, on checking I was incorrect on the penalty points.
There is an escalation clause for repeat offenders of a fine of up to £1,000.
Ghost plates or font formats deliberately designed not to be read by ANPR are still not classed as criminal offences.

CarbonV12V

Original Poster:

1,173 posts

208 months

Saturday 2nd May
quotequote all
Plates all fiited and look great - car is awesome biggrin


floodyd

5 posts

30 months

Saturday 2nd May
quotequote all
Man thats a pretty car!