Front Undertray removal

[Mac1967]

Hi Folks, Having simmered down from yesterday's utter disater with not being able to wire up my driving lights I once again phoned Sinclaires and spoke to a friendly chap there who told me I might need to remove the front undertray to see the plugs I need?

Could anyone talk me through removing the FRONT undertray on my S2 please so I don't screw this up as well?

Thankyou.

Regards,

Mac

>> Edited by Mac1967 on Monday 10th October 12:22

[Mac1967]

Can no one help out?

[madderdog]

Straight forward jack it up undo the bolts. If u can manage the wheel liners this is easier apart from there being about 14 bolts.

[Mac1967]

I took the wheel liners out already but I couldn't see the plugs. Sinclaires told me to take the undertray off and look there?

[jig]

It's very easy:

Get under the nose and have a look at the undertray. There are (3, I think) bolts on each side, another 3 or 4 on the rear edge and 3 going through the underside of the fibreglass nose into the front of the undertray. Remove all of these bolts and then slide the undertray forward by about 10mm to release it from the rear lip. Then drop the rear down and slide backwards out of the nose aperture.

[Mac1967]

Thank you...Much appreciated!

Regards,

Mac