MAF code causes
Author
Discussion

21TonyK

Original Poster:

12,648 posts

228 months

Saturday 18th October
quotequote all
Had an ongoing MAF code on an F56 mini diesel (B37). Seems to come and go but recently more persistent.

Cleaned and changed the sensor and as expected, no solution. So now I'm looking at everything else and two problems stand out.

1) the resonator box on the intake side has a broken clip where it seals so with engine vibration theres likely to be a slight leak.

2) the swirl flap arm (the bar inside the manifold) has a leak on the outside of the manifold and there is a little bit of oil coming from it

Is this enough to cause a MAF code or should I be taking more apart (which is tempting fate)



E-bmw

11,671 posts

171 months

Saturday 18th October
quotequote all
MAF fault codes are rarely indicative of a defective MAF but mostly indicative of A.N Other intake issue such as air leaking in somewhere after the MAF.

itcaptainslow

4,307 posts

155 months

Saturday 18th October
quotequote all
What specifically is the code?

21TonyK

Original Poster:

12,648 posts

228 months

Saturday 18th October
quotequote all
P0101 [0x0101]
Mass air flow (MAF) sensor/volume air flow (VAF) sensor - range/performance problem
Mass or Volume Air Flow Circuit Range/Performance
Status: Confirmed


P00BC [0x00BC]
Mass air flow (MAF) sensor A - circuit range/performance
Status: Pending