Bodyshop recommendations - Welding 2003 Fiat motorhome
Discussion
I have a 2003 Fiat Ducato based Laika motorhome.
It needs some welding on the underside of the cab area. Hopefully not too serious but was an advisory on the last MOT. Rear of inner wheelarches/near jacking point/subframe mounting area.
I am after a good welder who will cut out and replace what is needed, not just plate over. They must be able to accommodate a fairly large vehicle (library image of a similar van below).
I'm based between Leeds and Harrogate so somewhere near here would be ideal and if reasonable value, so much the better!
They will need to do the associated paintwork and I will probably also have them top up the rust proofing.
Any recommendations would be greatly appreciated.
Thank you!
It needs some welding on the underside of the cab area. Hopefully not too serious but was an advisory on the last MOT. Rear of inner wheelarches/near jacking point/subframe mounting area.
I am after a good welder who will cut out and replace what is needed, not just plate over. They must be able to accommodate a fairly large vehicle (library image of a similar van below).
I'm based between Leeds and Harrogate so somewhere near here would be ideal and if reasonable value, so much the better!
They will need to do the associated paintwork and I will probably also have them top up the rust proofing.
Any recommendations would be greatly appreciated.
Thank you!
Gassing Station | Yorkshire | Top of Page | What's New | My Stuff