MOT hydrocarbon & lambda FAIL
Discussion
Hello all,
Tok my 1993 Chimaera 4.0 for an MOT about a month ago and it failed on excessive exhaust hydrocarbons and high lambda reading. At the time there was a carbon smell and come smoke under hard acceleration.
I have then replaced all the plugs & leads, stepper motor and MAF sensor.
I have had another test today and has failed again on the same issues.
The car is running very smoothly with little to no smoke.
Any ideas on how to reduce the hydrocarbon and lambda readings?
Thanks
Tok my 1993 Chimaera 4.0 for an MOT about a month ago and it failed on excessive exhaust hydrocarbons and high lambda reading. At the time there was a carbon smell and come smoke under hard acceleration.
I have then replaced all the plugs & leads, stepper motor and MAF sensor.
I have had another test today and has failed again on the same issues.
The car is running very smoothly with little to no smoke.
Any ideas on how to reduce the hydrocarbon and lambda readings?
Thanks
Gassing Station | Chimaera | Top of Page | What's New | My Stuff