McLaren 650s Door Card Bolt Missing, but what is it?
Discussion
Hi All
I was hoping someone could help me with a bolt missing out of my door card.
I purchased my car some months back and I ve noticed the drivers door card didn t seem on quite right.
upon investigation I found 2 bolts missing. 1 in the end of the door and 1 near the speaker. The one in the end of the door I fitted fine but the one above the speaker I m not quite sure about?
when you look at the speaker it s on the top left around the 11 O clock position, and it appears to go through a brass bush and possibly screws onto a black arm? You have to remove your aircon display to get to it. I m really not sure what type of bolt should be there and should it screw onto this arm, although the arm only has a small hole?
hopefully this makes sense to someone. Any advice would be appreciated. Oh, and I can only find two videos and both don t really show what the bolt is?
I was hoping someone could help me with a bolt missing out of my door card.
I purchased my car some months back and I ve noticed the drivers door card didn t seem on quite right.
upon investigation I found 2 bolts missing. 1 in the end of the door and 1 near the speaker. The one in the end of the door I fitted fine but the one above the speaker I m not quite sure about?
when you look at the speaker it s on the top left around the 11 O clock position, and it appears to go through a brass bush and possibly screws onto a black arm? You have to remove your aircon display to get to it. I m really not sure what type of bolt should be there and should it screw onto this arm, although the arm only has a small hole?
hopefully this makes sense to someone. Any advice would be appreciated. Oh, and I can only find two videos and both don t really show what the bolt is?
Edited by HardiM1 on Tuesday 24th June 20:41
Gassing Station | McLaren | Top of Page | What's New | My Stuff