Brake master cylinder

[V8 FOU]

'99 Chimaera
I am sure this has been asked many times - but what is the original fitment of the brake master cylinder?
Looks like Fiesta to me.

[Belle427]

https://www.pistonheads.com/gassing/topic.asp?h=0&...

[PabloGee]

Depends what you're trying to do.

If you want to refurb, then you need to know, but if you need to replace, the easiest route is Motaclan.
I did see the servo a bit cheaper on ebay a few months after I'd replaced all my bits, but not enough to upset me...

[Sardonicus]

Master cyl can be changed with servo in situ fiddly yes but ive done a few now and I have sausage fingers , must of been a while back as I was still locating black OEM style TRW units think you'll struggle now however

[PabloGee]

Not sure how you managed that mate, I had to take the pedal box out.
Refitting was to have the servo and m/c + reservoir fitted together, with the hoses tightened into the m/c (hoses disconnected from the bulkhead connector block), then push all that more or less into position and then put the pedal box back in-situ to then bolt it all together, and finally tighten up the mounting bolts for the pedal box.