Elise s3 lights
Discussion
It was Paul's Exige thread that lead me to them. If you do go for them then you will also need a pair of larger rubber dust caps to fit over them as they have a longer body. Paul dug out the ebay link in his thread. If you can't find it let me know and I will search my ebay orders and get it for you.
Edited to add a link: https://www.ebay.co.uk/itm/125636086837
That is not the original item that I purchased as no longer available, but they were also 85mm inner diameter, so hopefully will do the job.
Edited to add a link: https://www.ebay.co.uk/itm/125636086837
That is not the original item that I purchased as no longer available, but they were also 85mm inner diameter, so hopefully will do the job.
Edited by GaryF on Tuesday 1st October 21:39
John Henry said:
Thanks do you know the H number or model number for Elise fitment?
The Elise has HB3/4 , I tried to fit the Pro9100 but there was not enough room between the rear of the bulb and the wheel arch liner as they stuck out much further than standard when the caps mentioned above are added.
I put it down to the difference in front clam to the Exige.
Would like to get a solution but as it’s only a couple times were out in dark on way back from early or late season ( for us ) TDs , it’s a first world problem and I just put up with the ungraded incandescent osram nightsearchers for now
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff