Vanquish gen 2 cruise resume button rhs

[Astontony]

I had the unfortunate button break. I must have caught it on a cleaning cloth and broke its internal positioning loop.
Has anyone had to replace one of these. I see one fellow glued his together as it was cracked but mine is broken under the top part so it still looks pristine but has fallen off.
I tried looking in Aston bits to no avail. I also tried Eurospares but no listing for the assembly. Can anyone steer me in the right direction. I can resort to superglue but would much rather replace it or them.

[Calinours]

I'd suggest glueing it. But not superglue. Do it properly with 2 part epoxy (Araldite) and it should never fail. Key is properly cleaning the glued joint and lightly clamping while it sets.

[skhannes]

Calinours said:

I'd suggest glueing it. But not superglue. Do it properly with 2 part epoxy (Araldite) and it should never fail. Key is properly cleaning the glued joint and lightly clamping while it sets.

Very sage advice here and I agree. I've done repairs like this, and if you choose repair over replace, use a two-part epoxy. I have a quick setting clear version epoxy that I have used on projects like this.

[Astontony]

Thanks for your advice however I would like to replace even if i have to replace all 3 buttons, has anyone on here bought 1 or 3 buttons, if so where from and at what tax.

[Astontony]

C'mon someone has surely broken a button and bought a new one I would like to find a replacement at a reasonable price, Can't find them on A M Bits.