Noble M400 - What to ask the Ford Parts Counter guy

Noble M400 - What to ask the Ford Parts Counter guy

Author
Discussion

RossoDiamante

Original Poster:

54 posts

109 months

Friday 23rd August
quotequote all
I have a 2007 M400 on the wrong side of the pond that shredded its Accessory Drive Belt at a recent track day. Sadly the search function doesn't appear to be working for me, so my profuse apologies, firstly.

Obviously, I need a new belt and was wondering if it is a standard Ford part and, if so, what the part number would be?

But more generically, if I'm in need of something standard-Ford for the engine/transmission/etc., what is the Ford engine "number or series" or what equivalent Ford car should I ask the parts guy to search under?

Thanks for your assistance.

From High Plains Raceway, Colorado....


MrBig

3,123 posts

136 months

Friday 23rd August
quotequote all
Are all the accessories in the same layout as they were in the Ford? If they are different that could affect the length you need.

Your best bet is to find a fellow Noble owner with the same spec and ask them to get the numbers off their belt or, failing that, you could run a piece of string around the belt route and measure the length.

I guess it's a 6 rib belt, so the belt number will start 6PK (or 5PK if it's a 5 rib belt etc). The rest of the belt number is the length in mm. Find a belt off the shelf within 5mm of your number and you should be good to go.

The 3.0 Mondeo V6 had two belts, a 3 rib for the water pump 3PK683 and a 6 rib for the alternator 6PK2075. That might work as a starting point, but I don't know Nobles I'm afraid, only Fords!


The devil

2,141 posts

190 months

Saturday 24th August
quotequote all
Hi
I think the number you have been given is incorrect, I have a GTO 3 and the part number 6PK followed by (I think )1706 but the car is not here at the moment, your best bet would be to ask on the facebook noble group. hardly any of us come on this forum any more

jeremyc

24,552 posts

291 months

Saturday 24th August
quotequote all
According to the Noble FAQ Wiki on this forum:

Wiki said:
Alternator belt According to Noble Parts, the Gates 6PK 1708 belt is the correct one
6PK 1705 (6 ribs 1705 long)
6PK 1700 (also fits fine and cured squeak on M400)
6PK 1238 for cars with air - con removed AND Daddysumo's smaller crank pulley fitted,
available from any motor factors.

sjc

14,308 posts

277 months

Monday 26th August
quotequote all
OP there’s two Facebook pages for our cars that are very active and a mountain of knowledge it’ll be well worth your while joining them.

RossoDiamante

Original Poster:

54 posts

109 months

Wednesday 25th September
quotequote all
Thanks for the helpful replies. I will certainly seek out the Facebook groups.

And start the hunt for the belt with the part numbers given.

Cheers.