S2 Suspension

[Geeb]

Replaced my standard S1 stuff (140 ride height) with Steve B`s 125/135 S2 kit. Do I need to raise the steering rack for just a 15mm drop?

And Also anyone know the specific geo settings that I should now be handing over to the local specialist to set the car up again?

Cheers in advance

Grant

[cuzza]

Shouldn't need to mess about with the rack but I suggest you ask Steve!

The std geo will be fine unless you want something different e.g Sport 160 or 340R settings.

[TrevorH]

As you're not going for the lower settings the rack should be fine in its current position.

Steve Butts gave me these numbers for the geometry. Edited to add: these are his recommendations, not the original settings.

Front camber 1 deg neg, front toe OUT 15 minutes total
Rear camber 2 deg neg, rear toe IN 1 deg total.

>> Edited by TrevorH on Wednesday 21st September 16:23

[Geeb]

So i will need a new geo but with the standard settings getting repeated?

Or just leave it as it is and not change to suit the new ride height?

[steff]

If you havent had a GEO done in a while I'd get one done as the difference between before and after is like night and day !